=Setting loops automatically (Auto loop) (p.24)
!The beat grid can be adjusted by turning the [AUTO LOOP (GRID SLIDE)] control while pressing the [SHIFT] button.
8TEMPO RANGE button
This switches the [TEMPO] slider’s adjustment range.
=Selecting the range for adjusting the playing speed (p.22)
9MASTER TEMPO button
Use this to turn the master tempo function on and off.
=Adjusting the playing speed without changing the pitch (Master Tempo) (p.22)
ASLIP button
This turns the slip mode on/off.
=Using the slip mode (p.25)
BTEMPO slider
Use this to adjust the track playing speed.
=Changing the playing speed (p.22)
CSYNC (SYNC OFF) button
If no deck is set to the [SYNC] mode, when this button is pressed, that deck is set to the [SYNC] mode and is set as the tempo master. If one deck is in the [SYNC] mode, the decks other than the ones for which this button was pressed are synchronized to the deck set as the tempo master.
=Synchronizing track beats (beat sync) (p.25)
DJog dial
This can be used for such operations as scratching, pitch bending, etc.
=Operating the jog dial (p.22)
!The top of the jog dial has an embedded switch. Do not place objects on the jog dial or subject it to strong forces. Also note that water or other liquids getting into the set will lead to malfunction.
EPLAY/PAUSE fbutton
Use this to play/pause tracks.
=Playing and pausing (p.22)
FCUE button
This is used to set, play and call out temporary cue points.
=Setting a temporary cue point (p.23)
GSHIFT button
When another button is pressed while pressing the [SHIFT] button, a different function is called out.
HRELOOP/EXIT (GRID CLEAR) button
Use this to return to loop playback (reloop) or cancel loop playback (loop exit).
=Returning to Loop playback (Reloop) (p.24)
=Canceling Loop playback (Loop Exit) (p.24) The beat grid can be cleared by pressing the
[RELOOP/EXIT (GRID CLEAR)] button while pressing the [SHIFT] button.
IREC MODE button
This switches the function of the [HOT CUE (DELETE)] button (set/
!When the power is turned on, the button is set to the
= Setting Hot Cue (p.24)
JREV button
Use this to turn reverse playback on and off.
=Playing in reverse (p.22)
KLOOP IN (GRID SET) button
When this button is pressed during playback at the position at which you want to start loop playback (the loop in point), the loop in point is set.
=Loop operations (p.23)
The beat grid can be set by pressing the [LOOP IN (GRID SET)] button while pressing the [SHIFT] button.
12En
LLOOP OUT (GRID TAP) button
When this button is pressed during playback at the position at which you want to end loop playback (the loop out point), the loop out point is set, playback returns to the loop in point and loop playback starts.
=Loop operations (p.23)
When the [LOOP OUT (GRID TAP)] button is pressed while pressing the [SHIFT] button, the beat grid can be adjusted during playback by tapping the button.
MHOT CUE (DELETE) button
This is used to set and call out hot cues.
=Setting Hot Cue (p.24)
Mixer/Effect section
1 2 3 4 5 6 7 8
| CRATES | FILES | BACK |
|
| LOAD PREPARE | BROWSE | PREPARE |
| |
|
|
|
| JUMP |
| SAVE |
|
|
|
|
| FX CH SELECT | TRIM | BROWSE | TRIM | FX CH SELECT |
| ||||
| B | MASTER | B MASTER |
| ||||||
|
|
|
|
|
|
| ||||
s | A | MIC |
|
|
|
|
| A | MIC | 9 |
| /AUX |
|
|
|
|
|
| /AUX | ||
|
|
|
| AREA MOVE REC |
|
|
|
| a | |
|
|
| MIN | MAX |
| MIN | MAX |
|
|
|
| EFFECT SELECT | HI | MASTER | HI |
| EFFECT SELECT |
| |||
|
|
|
|
|
|
| ||||
|
|
|
| LEVEL |
|
|
|
| b | |
|
|
|
|
|
|
|
|
|
| |
|
|
| MIN | MAX |
| MIN | MAX |
|
|
|
| PARAMETER | MID | MIN | MAX | MID |
| PARAMETER |
| ||
|
|
|
|
|
|
| ||||
r |
|
| EQ | HEADPHONES |
| EQ |
|
| c | |
|
| MIXING |
|
|
| |||||
|
|
|
|
|
|
| ||||
|
|
| MIN | MAX |
| MIN | MAX |
|
| d |
| LEVEL / DEPTH | LOW |
|
| LOW |
| LEVEL / DEPTH | |||
|
|
|
| CUE | MASTER |
|
|
|
| e |
|
|
|
| LEVEL |
|
|
|
| ||
| MIN | MAX | MIN | MAX |
| MIN | MAX | MIN | MAX | f |
q | ON / OFF |
|
|
|
|
| ON / OFF | |||
|
| CUE | MIN | MAX | CUE |
|
|
| g | |
|
|
|
|
|
|
| ||||
p |
|
| A | LEVEL | B |
|
|
|
| |
|
|
|
|
|
|
| ||||
|
|
|
| A MASTER B |
|
|
|
| h | |
|
|
| 9 |
|
|
| 9 |
|
| |
| TAP | 10 |
|
|
| 10 |
| TAP |
| |
|
|
|
|
|
|
|
| |||
|
| AUTO | 8 |
|
|
| 8 |
| AUTO |
|
|
| 7 |
|
|
| 7 |
|
| ||
|
|
|
|
|
|
|
|
| ||
o | FX1 | 6 |
|
|
| 6 |
| FX2 |
| |
5 |
|
|
| 5 |
|
| ||||
|
| 4 |
|
|
| 4 |
|
|
| |
|
|
| 3 |
|
|
| 3 |
|
|
|
|
|
| 2 |
|
|
| 2 |
|
|
|
|
|
| 1 |
|
|
| 1 |
|
|
|
n |
|
| 0 |
|
|
| 0 |
|
| i |
|
|
| C.F.REV |
|
|
|
| |||
|
|
| FADER START |
| FADER START |
|
|
| ||
|
|
|
|
|
|
|
|
|
| j |
|
|
| OFF ON OFF ON | THRU | OFF | ON |
|
|
| |
|
|
|
| C.F.REV |
|
|
|
|
| |
m l k
1CRATES button
The cursor moves between the crate list panel and track list each time this button is pressed.
2FILES button
Turns the display of the [Files] panel on/off.
3BACK button
Moves the cursor focus back one level.
4Rotary selector
Moves the cursor within the panel. Use this to select files or tracks.
=Selecting items (p.18)
5AREA MOVE (REC) button
Moves the cursor to a different panel.
=Selecting items (p.18)
6LOAD PREPARE (SAVE) button
Loads tracks to the [Prepare] panel.
=Using the [Prepare] list (p.21)
7BROWSE button
Turns the display of the [Browse] panel on/off.
8PREPARE button
Turns the display of the [Prepare] panel on/off.