4
The contents of the
5
The ITCH installer is launched.
6 Once the ITCH installer is launched, click [Continue].
7Read the contents of the license agreement carefully, click [Continue] and then click [Agree] to accept the license agreement.
If you do not agree to the license agreement, click [Disagree] to cancel installation.
8Select the folder in which you want to install ITCH, then click [Continue].
9Click [Install].
Installation begins.
The installation completed screen appears once installation is completed.
10 Click [Restart].
The computer is restarted.
Launching ITCH
For Windows
From the Windows [Start] menu, open [All Programs] > [Serato] > [ITCH], then click the [ITCH] icon.
For Mac OS X
In Finder, open the [Application] folder, next open [Serato] > [ITCH],
then | youBefore | |
| ||
| ||
About the driver software and | ||
start | ||
setting utility software | ||
| ||
This unit functions as an audio device conforming to the ASIO |
| |
standards. |
|
Using the settings utility software
Launching the settings utility software
Click the Windows [Start] menu>[All Programs]>[Pioneer ]>[DDJ]>[Pioneer DDJ ASIO Settings Utility].
Adjusting the buffer size
The setting at [USB BUFFER SIZE (LATENCY)] in the ITCH software’s
[SETUP] menu has priority for the buffer size. (The default setting is 512 samples/10 ms.)
=GENERAL (p.30)
!If an application using this unit as the default audio device (DJ software, etc.) is running, quit that application before adjusting the buffer size.
!If the [Buffer Size] or [Kernel Buffers] number is made large, drops in the data (breaks in the sound), etc., occur less easily, but the time lag due to transmission delays in the audio data (latency) increases.
If breaks in the sound occur with the default setting
1Launch [Pioneer DDJ ASIO Settings Utility] and change [Kernel Buffers] to [4].
2Set [USB BUFFER SIZE (LATENCY)] to the lowest buffer size at which no breaks in the sound occur.
If no breaks in the sound occur with the default setting
1Set [USB BUFFER SIZE (LATENCY)] to the lowest buffer size at which no breaks in the sound occur.
2Launch [Pioneer DDJ ASIO Settings Utility], change [Kernel Buffers] to [2], and check that no breaks in the sound occur.
3If no breaks in the sound occur, set [USB BUFFER SIZE (LATENCY)] to the lowest buffer size at which no breaks in the sound occur.
4If breaks in the sound occur, change [Kernel Buffers] to [3].
Checking the version of the driver software
Click the Windows [Start] menu>[All Programs]>[Pioneer ]>[DDJ]>[Pioneer DDJ Version Display Utility].
!You can check the firmware version of this unit on the screen.
!The firmware version is not displayed when this unit is not connected to the computer or when this unit and computer are not properly communicating.
En 9