Pioneer DEH-1100MP Repeating play, Playing tracks in random order, Scanning tracks or folders

	Section
Operating this unit	02

3To perform fast forward or reverse,

press and hold c or d.

# If you select ROUGH, pressing and holding c or d enables you to search every 10 tracks in the current disc (folder). (Refer to Searching every 10 tracks in the current disc or folder on the next page.)

4To skip back or forward to another track, press c or d.

Notes

!Read the precautions for discs and player on page 17.

!If an error message such as ERROR-11 is dis- played, refer to Error messages on page 17.

!There is sometimes a delay between starting up disc playback and the sound being issued. When being read, FRMTREAD is displayed.

!When playing CD-EXTRA or MIXED-MODE CDs, compressed audio and CD-DA can be switched by pressing BAND.

!If you have switched between compressed audio and CD-DA, playback starts at the first track on the disc.

!The built-in CD player can play back com- pressed audio recorded on CD-ROM. (Please see the following section for files that can be played back. Refer to page 18.)

!When playing back VBR (variable bit rate) re- corded files, elapsed play time may not be dis- played correctly.

!When playing compressed audio, there is no sound on fast forward or reverse.

Repeating play

Repeat play plays the same track/folder within the selected repeat play range.

1Press FUNCTION to select RPT.

2Press c or d to select the repeat range. DSC – Repeat all tracks

TRK – Repeat the current track FLD – Repeat the current folder

#If you select another folder during repeat play, the repeat play range changes to disc repeat.

#When playing CD, performing track search or fast forward/reverse cancels the repeat play auto- matically.

#When playing compressed audio, performing track search or fast forward/reverse during TRK (track repeat) changes the repeat play range to folder repeat.

#When FLD (folder repeat) is selected, it is not possible to play back a subfolder of that folder.

#To return to the normal display, press BAND.

Playing tracks in random order

Tracks in a selected repeat range are played in random order.

1 Select the repeat range.

Refer to Repeating play on this page.

2Press FUNCTION to select RDM.

3Press a or b to turn random play on or

off.

When random play is on, RDM appears in the display.

If you turn random play on during folder re-

peat, FRDM appears in the display.

# To return to the normal display, press BAND.

Scanning tracks or folders

Scan play searches the song within the se- lected repeat range.

1 Select the repeat range.

Refer to Repeating play on this page.

2Press FUNCTION to select SCAN.

3Press a to turn scan play on.

SCAN appears in the display. The first 10 sec- onds of each track is played.

#If you turn scan play on during FLD, FSCN ap- pears in the display.

English

En 9