Pioneer DEH-1100MP Built-in Player, Storing and recalling broadcast frequencies, Playing a disc

Section

02Operating this unit

2 Press BAND to select a band.

Press BAND until the desired band (F1, F2, F3 for FM or AM) is displayed.

3To perform manual tuning, briefly press c or d.

4To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly pressing

c or d.

# While pressing and holding c or d, you can skip stations. Seek tuning starts as soon as you release c or d.

Storing and recalling broadcast frequencies

%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1 to 6 and hold until the preset number stops flashing.

Memorized radio station frequency can be re-

called by pressing the preset tuning button.

# Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in

memory.

# Press a or b to recall radio station frequen- cies.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1Press FUNCTION to select LOCAL.

2Press a or b to turn local seek tuning on or off.

3Press c or d to set the sensitivity. FM: LOCAL 1—LOCAL 2—LOCAL 3—

LOCAL 4

AM: LOCAL 1—LOCAL 2

The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequen- cies with the touch of button.

!Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6.

1Press FUNCTION to select BSM.

2Press a to turn BSM on.

The six strongest broadcast frequencies are stored in the order of their signal strength.

#To cancel the storage process, press b.

Built-in Player

Playing a disc

1Insert a CD (CD-ROM) into the disc load- ing slot.

Playback will automatically start.

# Be sure to turn up the label side of a disc.

# After a CD (CD-ROM) has been inserted, press

SOURCE to select the built-in CD player.

# You can eject a CD (CD-ROM) by pressing

EJECT.

2Press a or b to select a folder when

playing a compressed audio.

# You cannot select a folder that does not have

a compressed audio file recorded in it.

# To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder 02.

8 En