Pioneer DEH-1150MPG owner manual Operating this unit Tuner, Built-in Player

Black plate (7,1)

Operating this unit

Tuner	Tuning in strong signals
Listening to the radio	Local seek tuning lets you tune in only those
	radio stations with sufficiently strong signals
Important	for good reception.

Section

02

English

If you are using this unit in North, Central or South America, reset the AM tuning step (see Setting the AM tuning step on page 11).

1Press SOURCE to select the tuner.

2Press BAND to select a band.

Press BAND until the desired band (F1, F2, F3 for FM or AM) is displayed.

3To perform manual tuning, briefly press c or d.

4To perform seek tuning, press and hold c or d for about one second and release. The tuner will scan the frequencies until a broadcast strong enough for good reception is

found.

# You can cancel seek tuning by briefly pressing

c or d.

# While pressing and holding c or d, you can skip stations. Seek tuning starts as soon as you release c or d.

Storing and recalling broadcast frequencies

%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1 to 6 and hold until the preset number stops flashing.

Memorized radio station frequency can be re-

called by pressing the preset tuning button.

# Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in

memory.

# Press a or b to recall radio station frequen- cies.

1Press FUNCTION to select LOCAL.

2Press a or b to turn local seek tuning on or off.

3Press c or d to set the sensitivity. FM: LOCAL 1—LOCAL 2—LOCAL 3—

LOCAL 4

AM: LOCAL 1—LOCAL 2

The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequen- cies with the touch of button.

!Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6.

1Press FUNCTION to select BSM.

2Press a to turn BSM on.

The six strongest broadcast frequencies are stored in the order of their signal strength.

#To cancel the storage process, press b.

Built-in Player

Playing a disc

1Insert a CD (CD-ROM) into the disc load- ing slot.

Playback will automatically start.

# Be sure to turn up the label side of a disc.

# After a CD (CD-ROM) has been inserted, press SOURCE to select the built-in CD player.

En 7

<QRD3017-A/N>7