Section

02Operating this unit

 

Section

Operating this unit

02

Removing the front panel to protect your unit from theft

1Press the detach button to release the front panel.

2Push the front panel upward and pull it toward you.

3Always keep the detached front panel in a protec- tion device such as a protection case.

Re-attaching the front panel

Note

When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off.

Menu operations identical for function settings/audio adjustments/initial settings

Returning to the ordinary display

Canceling the initial setting menu

! Press B (BAND/ESC).

Function settings

%Press FUNC to select the function. After selecting, perform the following proce- dures to set the function.

BSM (best stations memory)

BSM (best stations memory) automatically stores the six strongest stations in the order of their signal strength.

Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using 1 to 6.

1Press a to turn BSM on.

The six strongest broadcast frequencies are stored in the order of their signal strength. To cancel the storage process, press b.

Displaying text information

Selecting the desired text information

1Press D (DISP/SCRL).

Scrolling the text information to the left

1Press and hold D (DISP/SCRL).

Notes

!Depending on the version of iTunes used to write MP3 files to a disc or media file types, in- compatible text stored within an audio file may be displayed incorrectly.

!Text information items that can be changed depend on the media.

English

1Slide the front panel to the left.

Make sure to insert the tabs on the left side of the head unit into the slots on the front panel.

2Press the right side of the front panel until it is firmly seated.

If you cannot attach the front panel to the head unit successfully, make sure that you are placing the front panel onto the head unit correctly. For- cing the front panel into place may result in da- mage to the front panel or head unit.

Turning the unit on

1Press SRC/OFF to turn the unit on.

Turning the unit off

1Press SRC/OFF and hold until the unit turns off.

Selecting a source

1Press SRC/OFF to cycle through the sources listed below:

TUNER (tuner)—CD (built-in CD player)—AUX (AUX)

Adjusting the volume

1Turn SRC/OFF to adjust volume.

CAUTION

For safety reasons, park your vehicle when removing the front panel.

You can also cancel initial settings by holding

down SRC/OFF until the unit turns off.

Tuner

Basic Operations

Selecting a band

1Press B (BAND/ESC) until the desired band (F1, F2, F3 for FM or AM) is displayed.

Manual tuning (step by step)

1Press c or d.

Seeking

1Press and hold c or d, and then release.

You can cancel seek tuning by briefly pressing c or d.

While pressing and holding c or d, you can skip stations. Seek tuning starts as soon as you re- lease c or d.

Storing and recalling stations for each band

%When you find a station that you want to store in memory, press one of the preset tuning buttons (1 to 6) and hold until the preset number stops flashing.

Stored radio station frequency can be recalled

by pressing the preset tuning button.

# Press a or b to recall radio station frequen- cies.

LOCAL (local seek tuning)

Local seek tuning lets you tune in to only those radio stations with sufficiently strong signals for good re- ception.

1Press a or b to turn local seek tuning on or off.

2Press c or d to set the sensitivity.

FM: LOCAL 1—LOCAL 2—LOCAL 3—LOCAL 4

AM: LOCAL 1—LOCAL 2

The highest level setting allows reception of only the strongest stations, while lower levels allow the reception of weaker stations.

CD

Basic Operations

Playing a CD/CD-R/CD-RW

1Insert the disc into the disc loading slot with the label side up.

Ejecting a CD/CD-R/CD-RW

1Press h.

Selecting a folder

1Press a or b.

Selecting a track

1Press c or d.

Fast forwarding or reversing

1Press and hold c or d.

When playing compressed audio, there is no sound during fast forward or reverse.

Switching between compressed audio and CD-DA

1Press B (BAND/ESC).

Function settings

%Press FUNC to select the function. After selecting, perform the following proce- dures to set the function.

RPT (repeat play)

1Press c or d to select the repeat range. DSC – Repeat all tracks

TRK – Repeat the current track FLD – Repeat the current folder

RDM (random play)

1Press a or b to turn random play on or off. When random play is on, RDM appears in the dis- play.

If you turn random play on during folder repeat, FRDM appears in the display.

SCAN (scan play)

Scan play searches for a song within the selected repeat range.

1Press a to turn scan play on.

If you turn scan play on during FLD, FSCN ap- pears in the display.

2When you find the desired track press b to turn scan play off.

If the display has automatically returned to the playback display, select SCAN again by pressing FUNC.

After scanning of a disc (folder) is finished, nor- mal playback of the tracks begins.

PAUSE (pause)

1Press a or b to pause or resume.

SRTRV (sound retriever)

6 En

En 7