Section

02Operating this unit

Operating this unit

Section

02

Automatically enhances compressed audio and restores rich sound.

1Press a or b to select your favorite setting. OFF (off)—1—2

1 is effective for low compression rates, and 2 is effective for high compression rates.

FF/REV (fast forward/reverse)

You can switch the search method between fast for- ward/reverse and searching every 10 tracks. Selecting ROUGH enables you to search every 10 tracks.

1Press d to select ROUGH. FF/REV – Fast forward and reverse ROUGH – Searching every 10 tracks To select FF/REV, press c.

2Press B (BAND/ESC) to return to the playback dis- play.

3Press and hold c or d to search every 10 tracks on a disc (folder).

If the rest of track number is less than 10, press and hold c or d recalls the first (last) one.

SLA (source level adjustment)

SLA (Source Level Adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources.

!When selecting FM as the source, you cannot switch to SLA.

!Settings are based on the FM volume level, which remains unchanged.

!The AM volume level can also be adjusted with this function.

1Press a or b to adjust the source volume. Adjustment range: SLA +4 to SLA –4

Using the equalizer

%Press E (EQ/LOUD) to select the equali-

zer.

DYNAMIC—VOCAL—NATURAL—CUSTOM

—FLAT—POWERFUL

!CUSTOM allows you to create a customized setting.

Displaying the clock

%Press to turn the clock display on or

off.

# The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds.

Using an AUX source

1Insert the stereo mini plug into the AUX input jack.

2Press SRC/OFF to select AUX as the

source.

# AUX cannot be selected unless the auxiliary

setting is turned on. For more details, refer to AUX (auxiliary input) on the previous page.

English

Audio Adjustments

Audio Adjustments

%Press AUDIO to select the audio func- tion.

After selecting, perform the following proce- dures to set the audio function.

FAD (fader/balance adjustment)

1Press a or b to adjust fader (front/rear speaker balance).

2Press c or d to adjust the balance (left/right speaker balance).

BASS/MID/TREBLE (equalizer adjustment)

!Adjusted equalizer curve settings are stored in

CUSTOM.

1Press a or b to adjust the level. Adjustment range: +6 to -6

LOUD (loudness)

Loudness compensates for deficiencies in the low- and high-frequency ranges at low volume.

1Press a or b to turn loudness on or off.

2Press c or d to select the desired setting.

LOW (low)—HI (high)

!You can also turn loudness on or off by pressing and holding E (EQ/LOUD).

8 En

Other Functions

Adjusting initial settings

1Press SRC/OFF and hold until the unit turns off.

2Press SRC/OFF and hold until the clock appears in the display.

3Press FUNC to select the initial setting. After selecting, perform the following proce- dures to set the initial setting.

Setting the clock

1Press c or d to select the segment of the clock display you wish to set.

Hour—Minute

2Press a or b to put a clock right.

AUX (auxiliary input)

Activate this setting when using an auxiliary device connected to this unit.

1Press a or b to turn auxiliary setting on or off.

En 9