Pioneer DEH-1900MP operation manual Operating this unit Basic Operations, Tuner

Section
02		Operating this unit
	Basic Operations		3 To perform manual tuning, briefly press
	Turning the unit on and		c or d.
			4 To perform seek tuning, press and hold
	selecting a source
	You can select a source you want to listen to.		c or d for about one second and release.
			The tuner will scan the frequencies until a
	To switch to the built-in CD player, load a disc
			broadcast strong enough for good reception is
	in the unit (refer to the next page).
			found.

%Press SOURCE to select a source. Press SOURCE repeatedly to switch between the following sources:

Tuner—Built-in CD player—AUX

Notes

#You can cancel seek tuning by briefly pressing c or d.

#If you press and hold c or d you can skip sta- tions. Seek tuning starts as soon as you release the button.

!In the following cases, the sound source will not change:

—When there is no disc in the unit.

—When the AUX (auxiliary input) is set to off (refer to page 13).

!AUX is set to on by default. Turn off the AUX when not in use (refer to Switching the auxili- ary setting on page 13).

!When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal, the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the source off.

Storing and recalling broadcast frequencies

%When you find a frequency that you want to store in memory, press one of pre- set tuning buttons 1 to 6 and hold until the preset number stops flashing.

Memorized radio station frequency can be re-

called by pressing the preset tuning button.

# Up to 18 FM stations, six for each of the three FM bands, and six AM stations can be stored in

memory.

# You can also use a and b to recall radio sta- tion frequencies assigned to preset tuning but- tons 1 to 6.

Adjusting the volume

%Use VOLUME to adjust the sound level.

Turning the unit off

%Press SOURCE and hold until the unit turns off.

Tuner

Listening to the radio

1Press SOURCE to select the tuner.

2Press BAND to select a band.

Press BAND until the desired band (F1, F2, F3 for FM or AM) is displayed.

Tuning in strong signals

Local seek tuning lets you tune in only those radio stations with sufficiently strong signals for good reception.

1Press FUNCTION to select LOCAL.

2Press a or b to turn local seek tuning on or off.

3Press c or d to set the sensitivity. FM: LOCAL 1—LOCAL 2—LOCAL 3—

LOCAL 4

AM: LOCAL 1—LOCAL 2

8 En