Pioneer DEH-1900MP Built-inPlayer, Storing the strongest broadcast frequencies, Playing a disc

	Section
Operating this unit	02

The LOCAL 4 setting allows reception of only the strongest stations, while lower settings let you receive progressively weaker stations.

Storing the strongest broadcast frequencies

BSM (best stations memory) lets you automa- tically store the six strongest broadcast fre- quencies under preset tuning buttons 1 to 6. Once stored you can tune in to those frequen- cies with the touch of button.

!Storing broadcast frequencies with BSM may replace broadcast frequencies you have saved using buttons 1 to 6.

1Press FUNCTION to select BSM.

2Press a to turn BSM on.

Six strongest broadcast frequencies will be stored in the order of their signal strength.

#To cancel the storage process, press b.

Built-in Player

Playing a disc

1Insert a CD (CD-ROM) into the disc load- ing slot.

Playback will automatically start.

# Be sure to turn up the label side of a disc.

# After a CD (CD-ROM) has been inserted, press

SOURCE to select the built-in CD player.

# You can eject a CD (CD-ROM) by pressing

EJECT.

2Press a or b to select a folder when

playing a WMA/MP3/WAV disc.

# You cannot select a folder that does not have

a WMA/MP3/WAV file recorded in it.

# To return to folder 01 (ROOT), press and hold BAND. However, if folder 01 (ROOT) contains no files, playback commences with folder 02.

3To perform fast forward or reverse,

press and hold c or d.

# If you select ROUGH, pressing and holding c or d enables you to search every 10 tracks in the current disc (folder). (Refer to Searching every 10 tracks in the current disc or folder on the next page.)

4To skip back or forward to another track, press c or d.

Notes

!Read the precautions with discs and player on page 14.

!If an error message such as ERROR-11 is dis- played, refer to Error messages on page 14.

!There is sometimes a delay between starting up disc playback and the sound being issued. When being read, FRMTREAD is displayed.

!When playing CD-EXTRA or MIXED-MODE CDs, WMA/MP3/WAV and CD-DA can be swithced by pressing BAND.

!If you have switched between WMA/MP3/ WAV files and audio CD-DA, playback starts at the first track on the disc.

!The built-in CD player can play back a WMA/ MP3/WAV file recorded on CD-ROM. (Refer to page 15 for files that can be played back.)

!When playing back VBR (variable bit rate) re- corded files, erapsed play time may not be dis- played correctly.

!When playing WMA/MP3/WAV disc, there is no sound on fast forward or reverse.

Repeating play

Repeat play plays the same track/folder within the selected repeat play range.

1Press FUNCTION to select RPT.

2Press c or d to select the repeat range. DSC – Repeat all tracks

TRK – Repeat just the current track

FLD – Repeat the current folder

# If you select another folder during repeat play, the repeat play range changes to disc repeat.

English

En 9