#FAD0 is the proper settingwhen only two
speakersare used.
3 Presscor dto adjust left/right speaker
balance.
BALL 9 BAL R 9 is displayed as the lef t/right
speakerbalance moves from left to right.
Using the equalizer
Thereare six stored equalizer settings such as
DYNAMIC,VOCAL,NATURAL,CUSTOM,
FLATand POWERFUL that can easily be re-
calledat any time.
!CUSTOMis an adjusted equalizer cur ve
thatyou create.
!WhenFLAT is selected no supplement or
correctionis made to the sound. This is
usefulto check the effect of the equalizer
curvesby switching alternativelybetween
FLATand a set equalizer curve.
%PressEQ to select the equalizer.
PressEQ repeatedly to switch between the fol-
lowingequalizers:
DYNAMICVOCALNATURALCUSTOM
FLATPOWERFUL
Adjusting equalizer curves
Youcan adjust the currently selected equalizer
curvesetting as desired.Adjusted equalizer
curvesettings are memorized inCUSTOM.

Adjustingbass/mid/treble

Youcan adjust the bass/mid/treble level.
1 PressAUDIO to select BASS/MID/
TREBLE.
2 Pressaor bto adjust the level.
+66is displayed as the level is increased
ordecreased.
Adjusting loudness
Loudnesscompensates for deficiencies in the
low-and high-sound ranges at low volume.
1 PressAUDIO to select LOUD.
2 Pressato turn loudness on.
LOUDindicator is displayed.
#Toturn loudness off, press b.
#Youcan also turn loudness on or off by press-
ingand holding EQ.
3 Presscor dto select a desired level.
LOW(low)HI (high)
Adjusting source levels
SLA(source level adjustment) lets you adjust
thevolume level of each source to prevent ra-
dicalchanges in volume when switching be-
tweensources.
!Settingsare based on the FM tuner volume
level,which remains unchanged.
!TheMW/LW tuner volume level can also be
adjustedwith source level adjustments.
1 Comparethe FM tuner volume level
withthe level of the source you wish to ad-
just.
2 PressAUDIO to select SLA.
3 Pressaor bto adjust the source vo-
lume.
SLA+4 SLA 4is displayed as the source vo-
lumeis increased or decreased.
Operating this unit
En
14
Section
03