Operating this unit
Other Functions
Adjusting initial settings
Using the initial settings, you can customize various system settings to achieve optimal performance from this unit.
1.Press SOURCE and hold until the unit turns off.
2.Press SOURCE and hold until function name appears in the display.
3.Press FUNCTION to select one of the initial settings.
Press FUNCTION repeatedly to switch between the following settings:
FM (FM tuning step) –
Use the following instructions to operate each particular setting.
•To cancel initial settings, press BAND.
•You can also cancel initial settings by holding down SOURCE until the unit turns off.
Setting the FM tuning step
Normally the FM tuning step employed by seek tuning is 50 kHz. When AF or TA is on, the tuning step automatically changes to 100 kHz. It may be preferable to set the tuning step to 50 kHz when AF is on.
• The tuning step remains at 50 kHz during manual tuning.
1.Press FUNCTION to select FM.
2.Press 4 or 6 to select the FM tuning step.
Press 4 to select 50 (50 kHz). Press 6 to select 100 (100 kHz).
Switching Auto PI Seek
The unit can automatically search for a different station with the same programming, even during preset recall.
1.Press FUNCTION to select
2.Press 8 or 2 to turn the Auto PI seek on or off.
Switching the auxiliary setting
It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit.
1.Press FUNCTION to select AUX.
2.Press 8 or 2 to turn the auxiliary setting on or off.
Multi language display setting
Text information such as title name, artist name or comment can be recorded on a WMA/MP3/WAV disc.
This unit can display them even if they are embedded in either European language or Russian language.
•If embedded language and selected language setting are not consistent with each other, text information may not be displayed properly.
•Some characters may not be displayed properly.
1.Press FUNCTION to select TITLE.
2.Press 4 or 6 to select the language.
EUR (European language) – RUS (Russian language)
Saving the battery consumption
Switching this function on enables you to save the consumption of battery power.
•Operations other than turning on the source are not allowed when this function is on.
Important
•If the battery in your vehicle is disconnected the Power Save mode is canceled. Turn on Power Save again once the battery has been reconnected. If the ignition switch in your vehicle doesn’t have an ACC (accessory) position, it is possible depending on the connection method that when Power Save is off, the unit will draw power from the battery.
1.Press FUNCTION to select SAVE.
2.Press 8 or 2 to turn the power save on or off.
ENGLISH
15
