Operating this unit
Basic Operations
Turning the unit on and selecting a source
You can select a source you want to listen to. To switch to the
*Press SOURCE to select a source.
Press SOURCE repeatedly to switch between the following sources: Tuner –
Notes
•In the following cases, the sound source will not change:
–When there is no disc in the unit.
–When the AUX (auxiliary input) is set to off (refer to page 15).
•AUX is set to on by default. Turn off the AUX when not in use (refer to “Switching the auxiliary setting” on page 15).
•When this unit’s blue/white lead is connected to the vehicle’s
Adjusting the volume
*Use VOLUME to adjust the sound level.
Turning the unit off
*Press SOURCE and hold until the unit turns off.
Tuner
Listening to the radio
1.Press SOURCE to select the tuner.
2.Press BAND to select a band.
Press BAND until the desired band (F1, F2 for FM or MW/LW) is displayed.
3.To perform manual tuning, briefly press 4 or 6.
4.To perform seek tuning, press and hold 4 or 6 for about one second and release.
The tuner will scan the frequencies until a broadcast strong enough for good reception is found.
•You can cancel seek tuning by briefly pressing 4 or 6.
•If you press and hold 4 or 6 you can skip stations. Seek tuning starts as soon as you release the button.
Storing and recalling broadcast frequencies
*When you find a frequency that you want to store in memory, press one of preset tuning buttons 1 to 6 and hold until the preset number stops flashing.
Memorized radio station frequency can be recalled by pressing the preset tuning button.
•Up to 12 FM stations, 6 for each of the two FM bands, and 6 MW/LW stations can be stored in memory.
•Press 8 or 2 to recall radio station frequencies.
ENGLISH
9
