Removing the front panel

1 PressEJECT to open the front panel.
2 Slideand remove the front panel to-
wardyou.
Takecare not to grip it too tightly or to drop
thefront panel and protect it from contact
withwater or other fluidsto prevent perma-
nentdamage.
3 Putthe front panel into the protective
caseprovided for safe keeping.

Attaching the front panel

1 Makesure the inner cover is closed.
2 Replacethe front panel by clipping it
intoplace.
About the demo mode
Thisunit features two demonstration modes.
Oneis the reverse mode, the other is the fea-
turedemo mode.
!Youcannot cancel a demo mode when the
frontpanel is open.
!Whenthe front panel is open, BAND,
ENTERTAINMENT,EQand EQ-EX are not
available.
Important
Thered lead (ACC) of this unit should be con-
nectedto a terminal coupled with ignition switch
on/offoperations. If this is not done, the vehicle
batterymay be drained.

Reverse mode

Ifyou do not per form an operation within
about30 seconds, screen indications start to
reverse,and then continue reversing ever y 10
seconds.Pressing BAND when power to this
unitis turned off while the ignition switch is
setto ACC or ON cancels the reverse mode.
PressBAND again to start the reverse mode.

Featuredemo

Thefeature demo automatically starts when
powerto this unit is turned off while the igni-
tionswitch is set to ACC or ON. Pressing
ENTERTAINMENTduring feature demo opera-
tioncancels the feature demo mode. Press
ENTERTAINMENTagain to start the feature
mode.Remember that if the feature demo
continuesoperating when the car engine is
turnedoff, it may drain battery power.
Before YouStart
En 7
English
Section
01