Listening to the radio
1
2
3
4
5
Theseare the basic steps necessar y to operate
theradio. More advanced tuner operation is
explainedstarting on the next page.
Important
Ifyou are using this unit in North, Central or
SouthAmerica, reset the AM tuning step (see
Settingthe AM tuning step on page 50).
1Bandindicator
Showswhich band the radio is tuned to, AM
orFM.
2Presetnumber indicator
Showswhich preset has been selected.
3Stereo(ST) indicator
Showsthat the frequency selected is being
broadcastin stereo.
4LOCindicator
Showswhen local seek tuning is on.
5Frequencyindicator
Showsto which frequency the tuner is
tuned.
1 PressSOURCE to select the tuner.
PressSOURCE until you see Tuner displayed.
2 PressBAND to select a band.
PressBAND until the desired band is dis-
played,FM1,FM2,FM3 for FM or AM.
3 Toperform manual tuning, push
Multi-Controlleft or right.
Thefrequencies move up or down step by
step.
4 Toperform seek tuning, push and hold
Multi-Controlleft or right for about one
secondand release.
Thetuner will scan the frequencies untila
broadcaststrong enough for good reception is
found.
#Youcan cancel seek tuning by pushing
Multi-Controlleft or right.
#Ifyou push and hold Multi-Control left or
rightyou can skip stations. Seek tuning starts as
soonas you release Multi-Control.
Tuner
En
14
Section
04