Adjusting the brightness
Youcan adjust the display brightness. Initially
thismode is set to 12.
1 UseMulti-Control to select Brightness.
Brightnessappears in the display.
2 PushMulti-Control left or right to ad-
justthe brightness level.
Eachpushing Multi-Control left or right in-
creasesor decreases the brightness level. 0
15is displayed as the level is increased or
decreased.
Setting the rear output andsubwoofer controller
Thisunits rear output (rear speaker leads out-
putand RCA rear output) can be used for full-
rangespeaker (REAR SP:FULL) or subwoofer
(REARSP :S/W) connection. If you switch the
rearoutput setting to the REAR SP:S/W, you
canconnect a rear speaker lead directly to a
subwooferwithout using an auxiliar y amp.
Initially,the unit is set for rear full-range speak-
erconnection (REAR SP:FULL). When rear
outputis connected to full range speakers
(whenREAR SP:FULL is selected), you can
connectthe RCA subwoofer output to a sub-
woofer.In this case, you can select whether to
usethe subwoofer controller s (low pass filter,
phase)built-in PREOUT :S/W or the auxiliary
PREOUT:FULL.
1 UseMulti-Control to select REAR SP.
REARSP appears in the display.
2 PressMulti-Control to switch the rear
outputsetting.
PressingMulti-Control will switch between
REARSP :FULL (full-rangespeaker) and
REARSP :S/W (subwoofer)and that status will
bedisplayed.
#Whenno subwoofer is connected to the rear
output,select REAR SP:FULL.
#Whena subwoofer is connected to the rear
output,set for subwoofer REAR SP:S/W.
#Whenthe rear output setting is
REARSP :S/W, you cannot change the subwoofer
controller.
3 PushMulti-Control left or right to
switchthe subwoofer output or nonfading
output(full-range RCA output).
Eachpushing Multi-Control left or right will
switchbetween PREOUT :S/W and
PREOUT:FULL and that status will be dis-
played.
Notes
!Evenif you change this setting, there is no
outputunless you turn the nonfading output
(referto Using nonfading output on page 46)
orsubwoofer output (refer to Using subwoofer
outputon page 46) in the audio menu on.
!Ifyou change the subwoofer controller, sub-
wooferoutput and nonfading output in the
audiomenu return to the factory settings.
!Bothrear speaker leads output and RCA rear
outputare switched simultaneously in this
setting.
Switching the telephonemuting/attenuation
Soundfrom this system is muted or attenu-
atedautomatically when a call is made or re-
ceivedusing a cellular telephone connected to
thisunit.
!Thesound is turned off, MUTE or ATT is
displayedand no audio adjustment is pos-
sible.
Initial Settings
En 51
English
Section
11