Pioneer DEH-P3000IB Disconnecting a cellular phone, Registering a connected cellular phone

Section

06Available accessories

Disconnecting a cellular phone

1Use MULTI-CONTROL to select DISCONNECT PHONE in the function menu. Device name of the connected phone appears in the display.

2Press MULTI-CONTROL to disconnect a cellular phone from this unit.

After disconnection is completed, DISCONNECTED is displayed.

Registering a connected cellular phone

1Use MULTI-CONTROL to select SET PHONE in the function menu.

2Press MULTI-CONTROL to display the setting mode.

3Turn MULTI-CONTROL to select a regis- tration assignment.

P1 (user phone 1)—P2 (user phone 2)—P3 (user phone 3)—G1 (guest phone 1)—G2

(guest phone 2)

# You can also perform the same operations by

pushing MULTI-CONTROL up or down.

# As you select each assignment, you can see whether or not a phone is already registered. If the assignment is empty, NO DATA is displayed. If the assignment is already taken, the device name appears. To replace an assignment with a new phone, first delete the current assignment. For more detailed instructions, see Deleting a re- gistered phone on this page.

4Press MULTI-CONTROL to register the currently connected phone.

Deleting a registered phone

1Use MULTI-CONTROL to select

DELETE PHONE in the function menu.

2Press MULTI-CONTROL to display the setting mode.

3Turn MULTI-CONTROL to select a regis- tration assignment.

P1 (user phone 1)—P2 (user phone 2)—P3 (user phone 3)—G1 (guest phone 1)—G2

(guest phone 2)

# You can also perform the same operations by

pushing MULTI-CONTROL up or down.

# If the assignment is empty, NO DATA is dis- played and operation is not possible.

4Press MULTI-CONTROL to show the con- firmation display.

5Turn MULTI-CONTROL to select

DELETE OK? : YES.

The phone being deleted is now on standby.

#To cancel, select DELETE OK? : NO.

6Press MULTI-CONTROL to delete the phone.

After the phone is deleted, DELETED is dis- played.

Connecting to a registered cellular phone

Connecting to a registered phone manually

1Use MULTI-CONTROL to select CONNECT PHONE in the function menu.

When registration is completed, REG COMPLETED is displayed.

#If the registration fails, REG ERROR is dis- played. In this case, return to step 1 and try again.

2Press MULTI-CONTROL to display the setting mode.

3Turn MULTI-CONTROL to select a regis- tration assignment.

P1 (user phone 1)—P2 (user phone 2)—P3 (user phone 3)—G1 (guest phone 1)—G2 (guest phone 2)

36 En