Pioneer DEH-P3000IB Audio Adjustments Introduction of audio adjustments, Using balance adjustment

	Section
Audio Adjustments	03

Introduction of audio adjustments

1Press MULTI-CONTROL to display the main menu.

2Use MULTI-CONTROL to select AUDIO. Turn to change the menu option. Press to se- lect.

3Turn MULTI-CONTROL to select the audio function.

Turn MULTI-CONTROL to switch between the audio functions in the following order. FADER/BALANCE (balance adjustment)— PRESET EQUALIZER (graphic equalizer recall)

—EQ SETTING 1 (graphic equalizer adjust- ment)—EQ SETTING 2 (graphic equalizer fine adjustment)—LOUDNESS (loudness)—

SW SETTING 1 (subwoofer on/off setting)— SW SETTING 2 (subwoofer setting)— HIGH PASS FILTER (high pass filter)— BASS BOOST (bass boost)—SRC LV ADJUST (source level adjustment)

4Press MULTI-CONTROL to display the

setting mode of each function.

# Push MULTI-CONTROL left to display the

function selection menu.

# Push and hold MULTI-CONTROL left to dis- play the main menu.

5Adjust the each function.

Notes

!You can also select the audio function by pressing AUDIO on the remote control.

!To return to the previous display, press BACK.

!To return to the main menu, press and hold BACK.

!To return to the ordinary display, press BAND.

!When the subwoofer controller setting is PREOUT:REAR, you cannot switch to SW SETTING 1 (subwoofer on/off setting). (Refer to page 26.)

!You can select the SW SETTING 2 only when subwoofer output is turned on in

SW SETTING 1.

!When selecting FM as the source, you cannot switch to SRC LV ADJUST.

!If you do not operate functions within about

30 seconds, the display automatically returns to the ordinary display.

Using balance adjustment

You can change the fader/balance setting so that it can provide the ideal listening environ- ment in all occupied seats.

1Use MULTI-CONTROL to select

FADER/BALANCE.

2Press MULTI-CONTROL to display the setting mode.

3Press MULTI-CONTROL to select the seg- ment you wish to set.

Press MULTI-CONTROL repeatedly to switch between fader and balance.

4Turn MULTI-CONTROL to adjust speaker balance.

Front/rear speaker balance can be adjusted between FAD F15 and FAD R15.

Left/right speaker balance can be adjusted be-

tween BAL L15 and BAL R15.

# You can also perform the same operations by

pushing MULTI-CONTROL up or down.

# FAD 0 is the proper setting when only two

speakers are used.

# When the rear output setting is

REAR SP:SUB W, adjusting the front/rear speaker

balance is not effective. Refer to Setting the rear output and subwoofer controller on page 26.

Using the equalizer

The equalizer lets you adjust the equalization to match the car’s interior acoustic character- istics as desired.

English

En 21