Sanyo POA-PN03C Image adjustment, Controlling the Projector, Item, Description, Input source

Chapter 4 Controlling the Projector

Image adjustment

This function is to adjust the projected picture image and save the image mode. To store the adjusted value, click Store button, and to load the adjusted value, click Load button.

Item	Description
Contrast	Adjusts picture contrast (0~ 63)
Brightness	Adjusts picture brightness (0~ 63)
Color	Adjusts picture color saturation (0~ 63)
Tint	Adjusts picture hue (0~ 63)

50

Item	Description
Color Temp	Sets a color temperature mode. (X Low, Low, Mid, High,
White Balance	Adj.)
Red, Green,
Blue	Adjusts each white balance respectively. (0~ 63)
Sharpness	Adjusts picture sharpness. (0~ 31)

*When changing the value of the white balance, the color temp. indicates "Adj."

				Item		Description
				Gamma		Adjusts brightness of darker part of the picture. (0~
				Noise reduction		15)
						Switches noise reduction mode (OFF, L1, L2)
				Progressive		Switches progressive mode (ON, OFF, Film)
				Reset		Resets the Image adjustment to previous levels.
				Store		Stores the Image adjust-
						ment values. Select an
						item [Image1 - Image10]
						from the pull-down menu
						and click Store button.
				Load		Loads the Image mode.
						Select an image mode
						from the pull-down
						menu and click Load
						button. There may not be
	Input source					available mode depend-
						ing on the input mode as
Image mode Video Computer
						shown in the table left.
	Standard(AV)	4	*
Cinema		4	*
Standard(PC)		*	4		✐ The mark "4" means that the available image mode in the
Real		*	4
					selected input source. The error message appears when
Image1 - 10		4	4		selecting the disabled image mode indicated with "*".