Sanyo POA-PN03C owner manual Control by the web browser, Select input mode to Network previously

Chapter 5 Network Capture

[2] Control by the web browser

* PC provides the Network Capture.

PC1 PC2 PJ2 PJ1

Capture

PC3	PC4	PC6
	PC5	Project a screen
		image of PC1 with
		PC2.

*Start capturing of the PC1 from the PC5.

74

Select input mode to "Network" previously.

1 Access to the control page of the projector by using the web browser. From the Network menu, click Capture tab to display the setting page (☞ p.37).

2 Select the computer number from the pull-down menu button of "Connecting PC" and click Start but- ton. The screen image of the selected computer will appear on the projected screen in real time.

•To stop capturing, click Stop button. The captured image of the computer on the screen is frozen.

•To restart capturing, click Restart button.

3 To end capturing, click End button.

Set "On" when using the wireless mouse function

✐ The IP address of the connecting PC should be registered previously (☞ p.72). ✐ If the error message appears, check item "Parameter set up" (+ p.71).

✐ You can use the capture function by using the web browser or the projector if the Network Capture 3 software is installed into the computer correctly and its icon stays on the task bar.