Chapter 4 Controlling the Projector
Item | Description |
Logo | Sets on or off the logo display on the screen dur- |
Background | ing the startup. (Default, User, OFF) |
Sets screen background to blue when no signal | |
Display | input. (Blue, User, Black) |
Switches on or off the | |
Freeze | the screen.(OFF, CountdownOff, ON) |
Sets the image to freeze mode.(ON, OFF) | |
Power |
|
management | Sets into the selected power management mode |
| (OFF, Ready, Shutdown) if the input signal is |
| interrupted and no control key is pressed for the |
| specified period of time. |
On start | *The specified time can be set 1 to 30 min. |
Sets the | |
| AC cord to the outlet. (ON, OFF) |
Item Description
Lamp control*....Selects lamp control mode. (Auto, Normal, Eco)
This function may be disabled depending on the projectors.
Lamp
Corres. Value(h) Displays the lamp use time (Corresponding value) . Reset the time after lamp replacement.
Lamp Corres. Value Reset
1. Select a
2. Click OK button to execute the reset.
Item | Description |
|
|
Remote control |
|
ID | Sets the remote control ID.(Code 1 - Code 8) |
Fan speed control | Sets the fan control speed. (Normal, Max) |
Status | Indicates the current fan mode. |
Factory default | Sets all of the projector control items to the fac- |
| tory default setting except the following items. |
| Lamp Corres. Value, PJ time, Network PIN code, |
| Network setting |
| * This function is not effective for the settings |
| of the network unit, Network address settings, |
| |
PJ lock suspend | When the projector has a security of PIN code |
| lock, disable this function temporarily by pressing |
| Execute button. |
Setting procedure
1.Turn off the projector , disconnect AC cord from the outlet and then connect AC cord again.
2.Access this page with the web browser,
3.Click Execute button on the PJ lock suspend.
* This function is disabled after the projector turns on.
54
