Sanyo POA-PN03C System, Available selection when the ComputerAnalog input, English, Controls

Controls

System

This function is to select the system of signal input to the projector. The available system mode are listed on the pull-down menu button according to the input signal. Select a sys- tem and then click Set button.

Available selection when the Computer[Analog] input

Item	Description
XGA1	It automatically switches to the proper computer
	system of the input signal.
	* The computer system modes (VGA, SVGA, XGA.
	SXGA, UXGA, WXGA...) which meet the input sig-
	nal are listed.

Available selection when the VIDEO/S-VIDEO input

Item	Description
AUTO	It automatically switches to the proper color sys-
	tem of the input signal.
	* The selectable color systems are PAL, SECAM,
	NTSC, NTSC4.43, PAL-M and PAL-N.

Available selection when the Y, Pb/Cb, Pr/Cr input

Item	Description
AUTO	It automatically switches to the proper scanning
	system of the input signal.
	* The selectable scanning systems are 480i, 575i,
	480p, 575p, 720p, 1035i and 1080i.

ENGLISH

✐If the mode (Mode1 to Mode 10, ExMode11 to ExMode50) which is stored in the item "PC Adjustment" (☞ p.52) is available, they are also listed together with the above mode.

PJ-NET ORGANIZER

OWNER'S MANUAL [XP57 Series]

49