Power control and status check
About projector condition
Status | Description |
|
|
Normal | Projector is operating normally. |
Power management under operation... | Power management is operating |
Lamp failure | Lamp failure is occurring |
Abnormal temperature | The temperature of the projector became too high |
Cooling off due to Abnormal temp | Projector detects abnormal temp. and is cooling down itself. |
Power failure | Power failure has occurred inside the projector. Projector is turned |
| off. Disconnect the AC cord and ask servicing to a qualified ser- |
| vice personnel. |
| If the power failure occurs on the projector, "Power failure" is |
| indicated on the status column and the information icon appears |
| on the power column as shown below. Click this icon to display |
| further information of the power failure. |
| Click this icon to display |
| further information of |
| the power failure. |
When a security (PIN code lock) has been set on the projector, you also cannot control it through the network. To control the projector through the network temporarily, execute "PJ lock suspend" command to unlock the security. "PJ lock suspend" is on setting sub menu [3] on Setting main menu. (+p.54)
ENGLISH
✐The projector cannot be turned on during the projector is on cooling down.
✐The web browser checks and updates the projector's condition every 30 seconds automatically.
OWNER'S MANUAL [XP57 Series]
47
