Sanyo POA-PN03C Auto display setting and control page, Click Stop button to stop the auto-display

Using the network viewer function

4 Auto display setting and control page [3]

Display period*1 of the image (3 to 240 sec.)

Error info.

Repeat times (0 to 255 times)

* 0 means endless play

Click here to check the further information of the file error

1.Click Start button to start the auto-display. The image in the selected folder or pro- gram is displayed on the projector's screen. The web browser opens another window and displays the preview images on the Auto Control window sequentially.

2.Click Stop button to stop the auto-display.

• Restart the auto-display, click Restart button.

*During the auto-display stops, it enables you to display the images manually by using [<<] or [>>] button.

3.Click End button to end the auto-display.

•When pressing the Error button, the further information of the file error is displayed. For further error information, refer to the next page.

*1 When selecting the program file for auto-display, the display time of each image gives preference to the setting specified by the program file over the setting specified by the auto-display function above. The images not set the display time is according to the display time specified by the auto- display function above.

✐The display period is greatly affected by the network environment or the operation of multi con- trol, so it may not display the image as the specified display period.

✐The switching is not the same timing between the images on the screen and on the web browser.

PJ-NET ORGANIZER

OWNER'S MANUAL [XP57 Series]

ENGLISH

101