Chapter 4 Controlling the Projector
Register the projector
To use the multi control function, register the IP address of the projector you intend to control. Click PJ registration sub menu tab and set the IP address, Memo and Multi control item, then click Set button.
Items | Description |
|
|
IP address | Enter IP address of the projector to control |
Memo | Enter projector name or installed location etc. |
Multi control item | |
Control | Controlling the projector |
Control & Image.... | Controlling and displaying images |
Image | Displaying the images |
Confirmation of registered projector
To check the registered information, click Conf. & Change sub menu tab. The registered information of the projector is listed as the below.
*The word "none" is displayed if not using the "Memo" func- tion.
*When you click on a listed IP address, the login page for the selected projector will be dis- played with a new window.
IP address
Status
Memo
Page no.
Click here to close the sub menu Conf. & Change.
64
✐ 10 projectors per a page can be registered and up to 100 sets can be registered for the multi- control.
