Sanyo POA-PN03C E-mailsetting, 1Setting SMTP server and administrator address, Item, Description

Chapter 3 Basic Setting and Operation

E-mail setting

This product has an E-mail function which can send an alert message to users or an administrator if it detects an abnormality on the projector or run out of the life span of the lamp. Click E-mail setting on the main

menu and follow the below steps.

Item	Description
SMTP server*1	Sets server name or IP address of the SMTP server
Administrator
address	Sets e-mail address of administrator
Add e-mail
address	Sets e-mail address of the user to send mail when
	the projector has an abnormality.

1Setting SMTP server and administrator address

Set the server name or IP address of the SMTP server*1 and administrator address. The administrator address is set to "Reply-To" address of the message sent from the projec-

tor.

*1 The SMTP server is a server for sending E-Mail. Please contact your network administrator to have this SMTP server address.

✐If the network unit sends an alert message due to the abnormality on the projector but the SMTP server is down in some other reason, the message will not be sent. In this case, the message "Unable to connect to server." will be displayed on the setting page. To clear this message, set up SMTP server address again.

✐To use the E-Mail function, it must be set the DNS address on the Network setting page correctly.

✐You cannot use this E-mail function if the DNS server and SMTP server cannot be used in your net- work environment.

38