Chapter 4 Controlling the Projector
Power control and status check
Click Power & Status on the main menu. The control page will be dis- played.
By clicking ON or Standby button on the page, the power of the projector can be con- trolled.
Confirmation window as shown in the below appears when the Standby button is pressed.
Item | Description | Popup confirmation window |
|
|
| ||
PJ status |
|
|
|
Power | Displays the status of the lamp. (ON, OFF, On starting up, On cooling down) |
| |
Status | Displays the status of the projector's power. (Refer to next page.) |
| |
Power control | Controls the projector power by clicking the "ON" or "Standby" button. |
| |
PJ temp. |
|
|
|
Inside temp.A | Displays the surrounding temperature of lamp in the projector. (Sensor A) |
| |
Inside temp.B | Displays the surrounding temperature of panel in the projector. (Sensor B) |
| |
External temp | Displays the surrounding temperature of the intake vent. (Sensor C) |
| |
......... | The warning icon will appear if the temperature exceeds a specified value. |
| |
| Check if there is no object to obstruct the airflow around the intake or exhaust |
| |
| vent. It might be airfilter clogged. Clean up the airfilter. |
| |
| * The temperature unit can be set either Centigrade or Fahrenheit in item "Initial |
| |
| setting". (+p.34) |
| |
46
