Sanyo POA-PN03C owner manual English, keypallet Exit

*To change the number in a column, select “C” and press SELECT button to clear the number in the column and then enter the number again.

Installation and network configuration

How to enter the numbers with the screen 10-key pallet

1 Select a column with a red frame by using the point buttons 7 8 .

2 Press SELECT button. The screen 10-key pallet appears on the screen.

3 By using the point buttons(d e 7 8), select numbers 0 to 9 and press SELECT button. By repeating the above to enter the complete number on the column.

4 After entering the number in the column, select a move key (7 8 e d) located on the lower part of the pallet by using the point buttons and press SELECT button repeatedly to move the red frame.

5 Repeat steps 3 to 4 for entering all the network address.

6 After finishing, select "Exit" and press SELECT button. The 10-key pallet disappears on the screen.

10-key pallet

Exit

ENGLISH

PJ-NET ORGANIZER OWNER'S MANUAL [XP57 Series]

23