Basic Operation
Corresponding Display Indications and Buttons
This product’s display features Key Guidance Indicators. These light to indicate which of the 5/°/2/3, FUNCTION, and AUDIO buttons you can use. When you’re in the Function Menu (refer to next section) , Detailed Setting Menu (refer to page 11) , Initial Setting Menu (refer to page 31) or Audio Menu (refer to page 24) , they also make it easy to see which 5/°/2/3 buttons you can use to switch functions ON/OFF, switch repeat selections, and perform other operations.
Display indicator and corresponding buttons are shown below.
7Head Unit | 7Display |
x
z c | 2 1 3 |
When 1 is lit in the display, perform appropriate operations with the z buttons. When 2 is lit in the display, it indicates that you are in the Function Menu, Detailed Setting Menu, or Initial Setting Menu. You can switch between each of these menus and between different modes in the menus using button x on the head unit.
When 3 is lit in the display, it indicates you are in the Audio Menu. You can switch between modes in the Audio Menu using button c on the head unit.
Entering the Function Menu
The Function Menu lets you operate simple functions for each source.
Note:
•After entering the Function Menu, if you do not perform an operation within about 30 seconds, the Function Menu is automatically canceled.
1.Select the desired mode in the Function Menu. (Refer to next section, “Function Menu Functions”.)
Each press changes the Mode ...
9
