Pioneer DEH-P490IB operation manual Using ITS playlists, Creating a playlist with ITS programming

	Section
Available accessories	03

Function name Operation

	Refer to Selecting a repeat play
	range on page 13.
	But the repeat play ranges you can
	select are different from that of the
	built-in CD player. The repeat play
REPEAT	ranges of the multi-CD player are
	as below:
	! MCD – Repeat all discs in the
	multi-CD player
	! TRACK – Repeat just the cur-
	rent track
	! DISC – Repeat the current disc
RANDOM	Refer to Playing tracks in random
	order on page 13.
SCAN	Refer to Scanning folders and
	tracks on page 13.
ITS-PLAY	Refer to Using ITS playlists on this
	page.
PAUSE	Refer to Pausing disc playback on
	page 13.
	Refer to Using compression and
	BMX on page 13.
	Multi-CD player has DBE (dynamic
	bass emphasis) function instead
COMP/DBE	of BMX.
	The settings can be switched as
	below:
	OFF—COMP 1—COMP 2—OFF—
	DBE 1—DBE 2
TITLE IN	Refer to Using disc title functions
	on the next page.
ITS	Refer to Using ITS playlists on this
	page.

Notes

!If you select other discs during repeat play, the repeat play range changes to MCD.

!If you perform track search or fast forward/re- verse during TRACK, the repeat play range changes to DISC.

!After track or disc scanning is finished, nor- mal playback of the tracks will begin again.

!When playing a CD TEXT disc on a CD TEXT compatible multi-CD player, you cannot switch to TITLE IN. The disc title has already been recorded on a CD TEXT disc.

Using ITS playlists

ITS (instant track selection) lets you make a playlist of favorite tracks from those in the multi-CD player magazine. After you have added your favorite tracks to the playlist you can turn on ITS play and play just those selec- tions.

Creating a playlist with ITS programming

You can use ITS to enter and play back up to 99 tracks per disc from up to 100 discs (with the disc titles). (With multi-CD players sold be- fore the CDX-P1250 and CDX-P650, up to 24 tracks can be stored in the playlist.)

1Play a CD that you want to program. Press a or b to select the CD.

2Press FUNCTION and hold until TITLE IN appears in the display, then press FUNCTION to select ITS.

3Select the desired track by pressing c or d.

4Press a to store the currently playing track in the playlist.

ITS IN is displayed briefly and the currently playing selection is added to your playlist. The display then shows ITS again.

5Press BAND to return to the playback display.

Note

After data for 100 discs has been stored in mem- ory, data for a new disc will overwrite the oldest one.

Playback from your ITS playlist

ITS play lets you listen to the tracks that you have entered into your ITS playlist. When you turn on ITS play, tracks from your ITS playlist in the multi-CD player will begin to play.

1 Select the repeat range.

Refer to Playing tracks in random order on page 13.

English

En 29