Pioneer DEH-P7950UB Tuner, Basic Operations, Adjusting the volume, Operating this unit, English

Black plate (11,1)

Operating this unit

! External unit refers to a Pioneer product (such	Tuner
as one available in the future) that, although	Basic Operations
incompatible as a source, enables control of
basic functions by this unit. Two external units	If you are using this unit in North, Central or
can be controlled by this unit. When two exter-	South America, reset the AM tuning step (see
nal units are connected, the allocation of	Setting the AM tuning step on page 29).
them to external unit 1 or external unit 2 is	1 2 3	4	5
automatically set by this unit.
! When this unit’s blue/white lead is connected
to the vehicle’s auto-antenna relay control
terminal, the vehicle’s antenna extends when
this unit’s source is turned on. To retract the
antenna, turn the source off.

Section

02

English

Adjusting the volume

%Use MULTI-CONTROL to adjust the sound level.

6

1Band indicator

2Stereo (5) indicator

Shows when the selected frequency is being broadcast in stereo.

3LOC indicator

Shows when local seek tuning is on.

4Preset number indicator

5Signal level indicator

Shows the radio wave strength.

6Frequency indicator

1Press SOURCE to select the tuner.

2Press BAND to select a band.

Press BAND until the desired band (FM-1,

FM-2, FM-3 for FM or AM) is displayed.

3To perform manual tuning, push MULTI-CONTROL left or right.

4To perform seek tuning, push and hold MULTI-CONTROL left or right for about one second and release.

The tuner will scan the frequencies until a broadcast strong enough for good reception is

found.

# You can cancel seek tuning by pushing

MULTI-CONTROL left or right.

# If you push and hold MULTI-CONTROL left or right you can skip stations. Seek tuning starts as soon as you release MULTI-CONTROL.

En 11

<CRD4164-A/N>11