Pioneer DEH-P7950UB Using balance adjustment, Using the equalizer, Recalling equalizer curves

	Black plate (25,1)
	Section
Operating this unit	02

Using balance adjustment

You can change the fader/balance setting so that it can provide you an ideal listening envir- onment in all occupied seats.

1Use MULTI-CONTROL to select Fader.

# If the balance setting has been previously ad- justed, Balance will be displayed.

2Push MULTI-CONTROL up or down to adjust front/rear speaker balance.

Each time MULTI-CONTROL is pushed up or down, the front/rear speaker balance moves towards the front or rear.

F 15 to R 15 is displayed as the front/rear

speaker balance moves from front to rear.

# F/R 0 is the proper setting when only two

speakers are used.

# When the rear output setting is Rear SP :S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 30.

Custom1	Custom 1
Custom2	Custom 2
Flat	Flat
S.Bass	Super bass

!Custom1 and Custom2 are adjusted equal- izer curves that you create. Adjustments can be made with a 7-band graphic equali- zer.

!When Flat is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between Flat and a set equalizer curve.

%Press EQ to select the equalizer.

Press EQ repeatedly to switch between the fol- lowing equalizers: Powerful—Natural—Vocal—Custom1— Custom2—Flat—S.Bass

English

3Push MULTI-CONTROL left or right to adjust left/right speaker balance.

Each time MULTI-CONTROL is pushed left or right, the left/right speaker balance moves to- wards the left or right.

L 15 to R 15 is displayed as the left/right speaker balance moves from left to right.

Using the equalizer

The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.

Recalling equalizer curves

There are seven stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:

Display Equalizer curve

Powerful Powerful

Natural Natural

Vocal Vocal

Adjusting equalizer curves

The factory supplied equalizer curves, with the exception of Flat, can be adjusted to a fine de- gree (nuance control).

1Use MULTI-CONTROL to select the gra- phic equalizer adjustment.

Powerful appears in the display.

If the equalizer curve has been previously se- lected, the curve of that previously selected will be displayed instead of Powerful.

2Push MULTI-CONTROL left or right to select an equalizer curve.

Each time MULTI-CONTROL is pushed left or right, equalizer curves are selected in the fol- lowing order:

Powerful—Natural—Vocal—Custom1— Custom2—Flat—S.Bass

3Push MULTI-CONTROL up or down to adjust the equalizer curve.

Each time MULTI-CONTROL is pushed up or down, the equalizer curve increases or de- creases respectively.

En 25

<CRD4164-A/N>25