Connections
!Connect the power cord after all the connections between devices have been completed.
Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. Refer to the operating instructions for the component to be connected.
!Be sure to use the included power cord.
Connecting the input/output terminals
Rear panel, front panel
| Power amplifier, |
|
| Portable audio | DJ player | Analog player | To power outlet Headphones |
Power amplifier, |
|
| device |
|
| Computer | |
powered speakers, etc. | Power amplifier | Microphone |
|
| |||
powered speakers, |
|
|
| ||||
etc. |
|
| (for booth monitor) |
|
| DJ | |
|
|
|
|
|
|
| software |
R L | R L | R L | R L | R L | R | L |
|
|
| ||||||
| L | L |
| L | L | SIGNAL | L |
|
|
|
|
|
|
| GND |
|
|
|
|
| 12 dB |
|
|
|
|
|
|
|
| LINE 0 dB | PHONO | LINE | PHONO | LINE |
|
R | L R | R |
| R | R |
| R | AC IN |
MASTER OUT 1 | MASTER | BOOTH | MIC | AUX IN | PHONO 2 / LINE 2 |
| PHONO 1 / LINE 1 | USB |
| OUT 2 | OUT |
|
|
|
|
|
1 23 4 5 67 8 9 | a7 8 b | c d | e |
Rear panel |
|
| Front panel |
1MASTER OUT 1 terminals
Connect a power amplifier, powered speakers, etc., here.
Be sure to use these as balanced outputs. Be careful not to accidentally insert the power cord of another unit.
2MASTER OUT 2 terminals
Connect a power amplifier, powered speakers, etc., here.
3BOOTH output terminal
This is an output terminal for a booth monitor.
4MIC jack
Connects a microphone here.
5LINE, PORTABLE PLAYER selector switch
Switch this according to the audio level input to the [AUX] terminals.
ASIGNAL GND terminal
Connects an analog player’s ground wire here. This helps reduce noise when the analog player is connected.
B 
USB terminal
Connect to a computer.
!A USB hub cannot be used.
!To maintain performance, use with this unit and the computer connected directly using the included USB cable.
CAC IN
Connect this to a power outlet.
Connect the power cord after all the connections between devices have been completed.
Be sure to use the included power cord.
6AUX IN terminals
Connect a line level output device (such as a DJ player) or a device with a low gain (such as a portable audio player) here. Switch the terminals’ input gain according to the connected device using the [LINE, PORTABLE PLAYER] selector switch on this unit’s rear panel.
7LINE, PHONO selector switch
Switches the function of the [PHONO/LINE] terminals.
8PHONO1/LINE1 and PHONO2/LINE2 terminals
Connect a phono level output device (analog player (for MM car- tridges), etc.) or a line level output device (DJ player, etc.) here. Switch the terminals’ function according to the connected device using the [LINE, PHONO] selector switch on this unit’s rear panel.
DKensington security slot
EPHONES jacks
Connect headphones here.
Both stereo phone plugs (Ø 6.3 mm) and stereo mini phone plugs (Ø 3.5 mm) can be used.
!There are two output terminals (one for a stereo phone jack and one for a
9Smartphone stand
A mobile device can be set here.
For instructions on mounting the smartphone stand, see Mounting the smartphone stand on page 4.
10En