Functions and operations

Problem

Check

 

Remedy

 

Can’t crossfade.

Is the [CROSS F. CURVE (THRU, ,

)] (cross-

Set the [CROSS F. CURVE (THRU, ,

)] (crossfader curve selector) switch

 

 

fader curve selector) switch set to [THRU]?

to a position other than [THRU]. (Page 22)

 

Back cue function does not work.

Is a cue point set?

 

Set a cue point. (page 15)

 

 

 

 

Beat effect does not work.

Is one of the [BEAT FX] buttons (TRANS, FLANGER,

Press one of the [BEAT FX] buttons (TRANS, FLANGER, ECHO or ROLL). (page

 

ECHO or ROLL) pressed?

 

20)

 

 

Is the [LEVEL/DEPTH] control set to the center

Turn the [LEVEL/DEPTH] control clockwise or counterclockwise. (page 20)

 

position?

 

 

 

 

Is the [BEAT] control set to the proper position?

Set the [BEAT] control to the proper position. (page 20)

 

 

 

 

Color effect does not work.

Is a

 

Press one of the [SOUND COLOR FX (NOISE, PITCH, CRUSH, FILTER)] buttons.

 

[SOUND COLOR FX (NOISE, PITCH, CRUSH, FILTER)]

(page 20)

 

 

button pressed?

 

 

 

 

Is the [COLOR] control set to the proper position?

Set the [COLOR] control to the proper position. (page 20)

 

 

 

 

 

[SYNC] function does not work.

Has the music file been analyzed?

 

Analyze the file. (page 23)

 

[SYNC] function does not work even

Is the beat grid irregular?

 

Set the beat grid properly. (page 23)

 

when files are analyzed.

Is the beat grid properly tapped?

 

 

 

Are the BPMs of the tracks in the two decks too different?

The [SYNC] function will not work properly if the BPM of the track on the deck for which the [SYNC] button is pressed is outside the adjustable tempo range of the track on the deck for which the [SYNC] button is not pressed.

Are you scratching?

The [SYNC] function is disabled when scratching.

Settings are not stored in the memory.

Has the power been turned off directly after changing the setting?

After changing settings, wait at least 10 seconds before turning the power off. After editing (recording or deleting) a sampled sound source, be sure to press the [STANDBY/ON] button to turn the power off.

USB devices

Problem

Check

Remedy

 

 

 

USB device is not recognized.

Is the USB device properly connected?

Connect the device securely (all the way in).

 

 

Is the USB device connected via a USB hub?

USB hubs cannot be used.

Is the USB device supported by this unit?

This unit supports such USB mass storage class USB devices as external hard

 

disks and portable flash memory devices.

Is the file format supported by this unit?

Check the file format of the connected USB device. For the file formats supported by this unit, see About USB devices on page 5.

 

Are you using a USB device (such as a bus power-

Use a USB device within this unit’s rated current (such as a hard disk driven by

 

driven hard disk) whose current is higher than this

an AC adapter or other external power supply).

 

unit’s rated current (500 mA)?

 

 

—

Turn the power off, wait 1 minute, then turn the power back on.

 

 

 

Time is required to read USB devices

Is there a large number of folders or files recorded

When there are many folders or files, some time may be required for loading.

(flash memory drives and hard discs).

on the USB device?

 

Are files other than music files stored on the USB device?

When files other than music files are stored in folders, time is required to read them as well. Do not store files or folders other than music files on the USB device.

Playback does not start when a track

Are the files playable?

See Playable music file formats on page 5.

is loaded from a USB device.

 

 

Is the auto cue function activated?

Press the [TIME(AUTO CUE, QUANTIZE)] button for over 1 second to cancel the

 

 

 

auto cue function. (page 18)

 

 

 

File cannot be played.

Is the file copyright-protected (by DRM)?

Copyright-protected files cannot be played.

Music files cannot be played.

Are the music files damaged?

Play music files that are not damaged.

 

 

 

DJ software

Problem

Check

Remedy

DJ software on a computer cannot be

Is the included USB cable properly connected?

Connect the computer and this unit directly using the included USB cable. USB

operated.

 

hubs cannot be used. (page 10)

DJ software’s sound is not properly

Are the DJ software’s output settings and this

Check the DJ software’s settings, then check this unit’s settings on the

output.

unit’s [MIXER MODE] setting properly set?

[UTILITY] screen and set the proper signal path. (page 27)

 

Is the driver software properly set?

Set the driver software properly. (Page 26)

 

 

 

 

Are the connection cables properly connected?

Connect the connection cables properly. (page 10)

 

Are terminals or plugs dirty?

Wipe any dirt off terminals and plugs before connecting.

 

 

 

Is the connected, power amplifier, powered speak- Properly set the external input selection, volume, etc., on the power amplifier,

 

ers, etc., properly set?

powered speakers, etc.

 

 

 

Sound being played is interrupted

Is the driver software’s latency value suitable?

Set the driver software’s latency to a suitable value. (Page 26)

when using DJ software.

 

Set the DJ software’s latency to a suitable value.

 

 

 

 

 

36En