Pioneer DJM-350 Monitoring the sound over headphones (headphones section), Using the effect function (master effect section), Applying an effect, Varying the effect

Monitoring the sound over headphones (headphones section)

HEADPHONES

CH-1 CH-2

CUE CUE

MIXING 7

CUEMASTER

LEVEL

PHONES

1 Connect headphones to the [PHONES] jack.

For instructions on connections, see Connecting the input/output terminals on page 8.

2 Press [CH-1 CUE] or [CH-2 CUE] 7.

Select the channel you want to monitor.

—[CH-1 CUE]: The sound of [CH-1] is monitored.

—[CH-2 CUE]: The sound of [CH-2] is monitored.

!This operation is not necessary to monitor the master channel sound (the sound output from the [MASTER OUT 1, 2] terminals).

3Turn [MIXING] 8.

—When turned counterclockwise: The volume of [CH-1] and [CH-2] becomes relatively louder.

—At the center position: The sound of [CH-1] and [CH-2] has the same volume as the sound from the [MASTER OUT 1, 2] terminals.

—When turned clockwise: The volume of the sound output from the [MASTER OUT 1, 2] terminals becomes relatively louder.

4Turn [LEVEL] 9 in the headphones section clockwise.

Sound is output from the headphones.

!Monitoring is canceled when [CH-1 CUE] or [CH-2 CUE] is pressed again.

!Monitoring of the sound output from the [MASTER OUT 1, 2] termi- nals cannot be canceled.

Applying an effect

Press one of the [MASTER EFFECT (GATE, CRUSH, JET, FILTER)] Q buttons.

The effect is applied to the sound. The button that was pressed flashes.

The effect differs for the different buttons. For details on the different effects, see the table below.

!When a button that is flashing is pressed again, the effect is turned off.

Effect Name	Descriptions	LEVEL/DEPTH
	The distinctive range is	Left: The high range (high
	The distinctive range is	hat, etc.) is given variation.
	cut from the sound of the	hat, etc.) is given variation.
GATE	cut from the sound of the	Right: The low range (bass
GATE	track’s rhythm section to	Right: The low range (bass
	track’s rhythm section to	drum, etc.) is given varia-
	give variation to the rhythm.	drum, etc.) is given varia-
	give variation to the rhythm.	tion.

		Left: The sound is crushed
		and an effect as if the high
		range was gradually cut is
CRUSH	The sound is moderately	achieved.
CRUSH	crushed, adding accent.	Right: The sound is crushed
	crushed, adding accent.	Right: The sound is crushed
		and an effect as if the low
		range was gradually cut is
		achieved.

	An effect like a jet ascend-	Left: An effect like a jet
	An effect like a jet ascend-	descending is achieved.
JET	ing and descending is	descending is achieved.
JET	ing and descending is	Right: An effect like a jet
	achieved.	Right: An effect like a jet
	achieved.	ascending is achieved.
		ascending is achieved.

		Left: An effect as if the high
	The sound of the high or	range was gradually cut is
	The sound of the high or	achieved.
FILTER	low range is filtered out,	achieved.
FILTER	low range is filtered out,	Right: An effect as if the low
	greatly changing the tone.	Right: An effect as if the low
	greatly changing the tone.	range was gradually cut is
		range was gradually cut is
		achieved.

Varying the effect

Turn [LEVEL/DEPTH] R.

The effect changes according to the direction in which the [LEVEL/ DEPTH] is turned and its position.

!The original sound is output when [LEVEL/DEPTH] is set to the center position.

Using the effect function (master effect section)

This unit is equipped with four effect buttons. When an effect button is pressed, the corresponding effect is applied to the audio signals output from the [MASTER OUT 1, 2] terminals.

MASTER EFFECT

GATE JET

CRUSH FILTER

LEVEL/DEPTH