
Connections
Be sure to turn off the power and unplug the power cord from the power outlet whenever making or changing connections. Refer to the operating instructions for the component to be connected.
Connect the power cord after all the connections between devices have been completed. Be sure to use the included power cord.
Names of terminals
Rear panel
Connections
SIGNAL
GND
| MASTER OUT |
| AUX | |||
AC IN | 1 | 2 | PHONO | CD | PHONO | CD |
| L | L |
| L | L | |
|
|
| MIC | |||
|
|
|
|
|
| |
|
|
|
| CONTROL |
| CONTROL |
|
| R | R |
| R | R |
1 | 2 | 3 | 4 | 5 6 3 | 4 | 5 | 7 | 8 | 9 |
1AC IN
Connect to an AC outlet. Plug in the power cord after all connections have been made.
Be sure to use the included power cord.
2MASTER OUT 1, 2 (page 8)
Connect to a power amplifier, etc.
3PHONO (page 8)
Connect to an analog player or other phono level (MM cartridge) output device. Do not connect to a DJ player or other line level device.
4CD (page 8)
Connect to a DJ player or other line level device.
5CONTROL (page 8)
Connect using a control cord (included with Pioneer DJ players).
6SIGNAL GND (page 8)
Connect an analog player’s ground wire here. This helps reduce noise when the analog player is connected.
7AUX (page 8)
Connect to the output terminal of an external device (sampler, portable audio device, etc.)
8MIC (page 8)
Connect to a microphone.
9Kensington security slot
Front panel
a
APHONES (page 8)
Connect headphones here.
En 7