Additional information

Troubleshooting

!Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble can- not be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

!This unit may not operate properly due to static electricity or other external factors. In this case, normal operation may be restored by unplug- ging the power cord, waiting about 5 seconds or more, then plugging the power cord back in.

Problem

Check

 

 

Remedy

 

 

The power is not turned on.

Is the power cord properly connected?

Plug in the power cord to an AC outlet. (page 8)

 

 

 

No sound or small sound.

Is the [CD, PHONO] (input selector) switch set to

Switch the [CD, PHONO] (input selector) switch to select the

 

the proper position?

 

input source for that channel. (page 10)

 

 

 

 

Are the [TRIM], [channel fader], [crossfader] and

Set the [TRIM], [channel fader], [crossfader] and [MASTER

 

[MASTER LEVEL] controls set to the proper posi-

LEVEL] controls to the proper positions. (page 10)

 

tions?

 

 

 

 

 

 

Are the connected components, amplifiers, etc.,

Set the external input selection, volume, etc., on the components/

 

properly set?

 

 

amplifiers properly.

 

 

Are the connection cables properly connected?

Connect the connection cables properly. (page 8)

 

 

 

 

Are the terminals and plugs dirty?

Clean the terminals and plugs before making connections.

Distorted sound.

Is [MASTER LEVEL] set at the proper position?

Adjust [MASTER LEVEL] so that the orange indicator on the mas-

 

 

 

 

ter level indicator lights at the peak level. (page 10)

 

Is [TRIM] set at the proper position?

Adjust [TRIM] so that the orange indicator on the channel level

 

 

 

 

indicator lights at the peak level. (page 10)

Can’t crossfade.

Is the [THRU,

,

] (crossfader curve selector)

Set the [THRU,

,

] (crossfader curve selector) switch to a

 

 

switch set to [THRU]?

 

position other than [THRU]. (page 10)

 

 

 

Can’t fader start a DJ player.

Is [FADER START] set to off?

Set [FADER START] to on. (page 11)

 

Is the control cord properly connected?

Connect this unit and DJ player with a control cord. (page 8)

 

Are the audio cables properly connected?

Connect this unit to the audio output terminal of a DJ player with

 

 

 

 

an audio cable. (page 8)

No effect.

Has one of the [MASTER EFFECT (GATE, CRUSH,

Press one of the [MASTER EFFECT (GATE, CRUSH, JET, FILTER)]

 

JET, FILTER)] buttons been pressed?

buttons. (page 12)

 

 

 

Is [LEVEL/DEPTH] set to the center position?

Turn [LEVEL/DEPTH] clockwise or counterclockwise. (page 12)

 

 

 

No sound is produced or the sound is faint

Is [MASTER LEVEL] set at the proper position?

Before recording, adjust [MASTER LEVEL] so that the orange

when playing a track recorded on a USB

 

 

 

indicator on the master level indicator lights at the peak level.

device.

 

 

 

(page 10)

 

 

Sound is distorted when playing a track

Is [TRIM] set at the proper position?

Before recording, adjust [TRIM] so that the orange indicator on

recorded on a USB device.

 

 

 

the channel level indicator lights at the peak level. (page 10)

The sound of a recorded track cannot be pre-

Is [MIXING] turned all the way clockwise?

Turn [MIXING] counterclockwise from the center position. (page 13)

viewed over the headphones even when [TRACK

 

 

 

 

 

 

MARK (PREVIEW)] is pressed and held.

 

 

 

 

 

 

USB device is not recognized.

Is the USB device properly connected?

Insert the USB device securely all the way in. (page 13)

 

Is the USB device one that can be used on this

This unit supports such USB mass storage class USB devices as

 

unit?

 

 

external hard disks and portable flash memory devices.

Sound is distorted when an analog player is

Have you connected an analog player with a built-

If the analog player is equipped with a built-in phono equalizer,

connected to this unit’s [PHONO] terminals.

in phono equalizer?

 

connect it to the [CD] terminals. (page 8)

Or, lighting of the channel level indicator does

 

 

 

If the analog player with built-in phono equalizer has a PHONO/

not change even when the [TRIM] control is

 

 

 

 

 

 

LINE selector switch, switch it to PHONO.

turned.

 

 

 

Is an audio interface for computers connected

If the computer audio interface’s output is line level, connect it to

 

 

between the analog player and this unit?

the [CD] terminals. (page 8)

If the analog player has a PHONO/LINE selector switch, switch it to PHONO.

information Additional

En 15