Pioneer DJM-500 operating instructions Rear section

NAME AND FUNCTION OF PARTS

Rear section

1 2 3 4 5 6 7 9 8 9

MASTER BOOTH OUT 1 MONITOR

L

CH - 4CH - 3

PHONO 3 PHONO 2 LINE

LL

CH - 2

PHONO 1 CD 2 / LINE

L

CH - 1

LINE CD 1

L

R	R	R	R		R
	MASTER		SIGNAL
			GND	CH - 2	CH - 1
	LEVEL
					PLAYER CONTROL
	ATT.

MASTER

OUT 2

~AC IN R

R	L R	L R	L	CH - 4
L	MASTER OUT 3	SEND (MONO)	RETURN (MONO)	SUBMIC

0 - = ~ !

1Master Output 1 Terminal (MASTER OUT 1)

Connects the power amplifier using a cord with RCA plug.

2Booth Monitor Output Terminal

(BOOTH MONITOR)

Connects the power amplifier which connects the speaker for monitoring audio.

3Master Output Level Adjustment Knob

(MASTER LEVEL ATT.)

4CH-4 Phono Input Terminal (PHONO 3)

PHONO 3 : Connects the analog player. (for MM only)

5CH-3 Input Terminal

PHONO 2 : Connects the analog player. (for MM only)

LINE : Connects audio equipment such as DAT.

6Ground Terminal (SIGNAL GND)

Connects to the GND cord of the analog player.

This terminal is for only an analog player, not for a safety ground.

7CH-2 Input Terminal

PHONO 1 :Connects to the analog player. (for MM only) CD/LINE : Connects optional CD players such as CDJ-500.

9CH-1, 2 Player Control Terminal

When connecting the optional CDJ-500 or CDJ-500G to the CD terminals of CH-1 or CH-2, the fader start function can be used by connecting this terminal to the control terminal of the player.

0Power Cord Connection Terminal

Connects the power cord provided.

-Master Output 2 Terminal (MASTER OUT 2)

Connects the XLR input supporting power amplifier.

=Master Output 3 Terminal (MASTER OUT 3)

Connects the PHONE input supporting power amplifier.

~External Effector Connecting Terminal

(SEND, RETURN)

Used to connect other equipment for adjusting sound. SEND (Output) : Connects the input terminal of the ex-

ternal effector.

Uses L channel output for using the effector of monaural input.

The sound that L and R are mixed will be sent to the effector.

RETURN (Input) : Connects the output terminal of the ex- ternal effector.

Uses L channel input for using the ef- fector of monaural input. It will be in- put to both channels L and R.

8CH-1 Input Terminal

LINE : Connects audio equipment such as a cassette deck, etc.

CD : Connects optional CD players such as the CDJ-500.

!CH-4 Sub Microphone Input Terminal (SUB MIC)

11

<DRB1192>