Pioneer DV-2750, DV-470 operating instructions Connecting to an AV receiver, Interlace

Connecting up

8

En

Connecting to an AV receiver

•Use a component video cable (not supplied) to connect the COMPONENT VIDEO OUT jacks to a component video input on your TV, monitor or AV receiver.

COMPONENT

VIDEO IN

TV

DIGITAL AUDIO OUT	AUDIO OUT
Y	PB
COAXIAL	L

To enjoy multichannel surround sound you need to connect this player to an AV receiver using the	English
digital audio output.
Model DV-470 has both optical and coaxial digital outputs; models DV-2750 and DV-370 have only a
coaxial-type output.
In addition to a digital connection, we recommend also connecting using the stereo analog
connection.
You’ll probably also want to connect a video output to your AV receiver. You can use any of the video
outputs available on this player (the illustration shows a standard (composite) connection).

		R
S		PR
	VIDEO OUT	COMPONENT VIDEO OUT

DV-2750

DV-370

1Connect the DIGITAL AUDIO OUT COAXIAL jack on this player to a coaxial digital input on your AV receiver.

	DIGITAL IN
AV receiver	(COAXIAL)

Watching progressive scan video from the component video outputs

This player can output progressive scan video from the component video output. Compared to interlace video, progressive scan video effectively doubles the scanning rate of the picture, resulting in a very stable, flicker-free image.

To set up the player for use with a progressive scan TV, see Video Output settings on page 18. When the player is set to output progressive scan video, the PRGSVE indicator lights in the front panel display.

Important

•DV-2750/DV-370 only: When Component Out (page 18) is set to Progressive, there is no video output from the VIDEO OUT (composite) and S (S-video) jacks.

•DV-2750/DV-370 only: If you want to display video on more than one monitor simultaneously, make sure the player is set to Interlace.

•If you connect a TV that is not compatible with a progressive scan signal and switch the player to progressive, you will not be able to see any picture at all. In this case, switch everything off and reconnect using the supplied video cable (see Easy connections on page 7), then switch back to Interlace (see below).

Switching the video output to interlace using the front panel controls

Use a coaxial cable (similar to the supplied video cable) to connect the COAXIAL DIGITAL AUDIO OUT jack to a coaxial input on your AV receiver.

DV-470 only: You can also use the optical output (OPTICAL DIGITAL AUDIO OUT) to make the same connection.

DIGITAL AUDIO OUT	AUDIO OUT
Y	PB
COAXIAL	L
	R
S VIDEO OUT	PR
	COMPONENT VIDEO OUT
DV-2750
DV-370
	DIGITAL IN
	(OPTICAL)
AV receiver	DIGITAL IN
	(COAXIAL)

Switch the player to standby then, using the front

L

Y PB

panel controls, press STANDBY/ON while		STANDBY/ON
pressing	to switch the player back to
Interlace.		STANDBY/ON
	DV-2750

Compatibility of this player with progressive-scan and high-definition TVs

This player is compatible with progressive video Macro Vision System Copy Guard. Consumers should note that not all high-definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of 525 progressive scan picture problems, it is recommended that the user switch the connection to the ‘standard definition’ output (Interlace). If there are questions regarding our TV set compatibility with this model, please contact our customer service center.

This player is compatible with the following Pioneer displays and monitors: PDP-504HDE, PDP-434HDE

2Connect the analog AUDIO OUT L/R and VIDEO OUT jacks on this player to a set of analog audio and video inputs on your AV receiver.

•You can use the SCART AV connector, or the S-video or component video jacks to connect to the AV receiver if you prefer.

		COAXIAL
		R
1	2	OPTICAL	VIDEO	PR	S
AUDIO OUT		DIGITAL AUDIO OUT	OUT	COMPONENT VIDEO OUT	VIDEO OUT

DV-470

AV receiver	AUDIO/
	VIDEO IN
DIGITAL AUDIO OUT	AUDIO OUT
Y	PB
COAXIAL	L
	R
S VIDEO OUT	PR
	COMPONENT VIDEO OUT

DV-2750

DV-370