Pioneer DV-2750, DV-470 Getting started, Switching on, Setting up the player for your TV

Getting started

Chapter 4

Getting started

Switching on

After making sure that everything is connected properly and that the player is plugged in, press STANDBY/ON on the front panel or remote control to switch the player on.

Also, switch on your TV and make sure that it is set to the input you connected the DVD player to.

STANDBY/ON

STANDBY/ON

DV-2750

FAQ

Button	What it does
HOME MENU	Display/exit the on-screen display.
	Changes the highlighted menu item.
ENTER	Selects the highlighted menu item (both ENTER buttons on the remote work
	in exactly the same way).
RETURN	Returns to the main menu without saving changes.

Note

•From here on in this manual, the word ‘select’ generally means use the cursor buttons to highlight an item on-screen, then press ENTER.

Setting up the player for your TV

If you have a widescreen (16:9) TV, you should setup the player so that the picture will be presented correctly. If you have a conevntional (4:3) TV, you can leave the player on the default setting and move on to the next section.

10

En

English

•My DVD player switches on but there is nothing displayed on my TV.

Make sure that the TV is set to the correct video input (not a TV channel). For example, if you connected this player to the VIDEO 1 inputs on your TV, switch your TV to VIDEO 1.

Note

•This player features a screen saver and an auto power off function. If the player is stopped and no button is pressed for around five minutes, the screen saver starts. If the disc tray is closed but no disc is playing and no control is pressed for about 30 minutes, the player automatically goes into standby.

1Press HOME MENU and select ‘Initial Settings’.

2Select ‘TV Screen’ from the ‘Video Output’ settings.

Initial Settings

Initial Settings

Digital Audio Out	TV Screen	4:3 (Letter Box)
Video Output	Component Out	4:3 (Pan&Scan)
Language	S-Video Out	16:9 (Wide)
Display
Options

Using the on-screen displays

For ease of use, this player makes extensive use of graphical on-screen displays (OSDs).

All the screens are navigated in basically the same way, using the cursor buttons ( ) to change the highlighted item and pressing ENTER to select it.

ENTER

OPEN/	TOP MENU	MENU
CLOSE
	HOME	ENTER
	MENU	RETURN

	ENTER
HOME		DV-2750
GUIDEMENU	RETURN

3 If you have a widescreen (16:9) TV, select ‘16:9 (Wide)’.

If you have a conventional (4:3) TV, you can change the setting from 4:3 (Letter Box) to 4:3 (Pan & Scan) if you prefer. See Video Output settings on page 18 for more details.

4 Press HOME MENU to exit the menu screen.

Setting the language of this player’s on-screen displays

This sets the language of this system’s on-screen displays.

1 Press HOME MENU and select ‘Initial
Settings’.		Initial Settings
2 Select ‘OSD Language’ from the ‘Display’
	Initial Settings
settings.
	Digital Audio Out	OSD Language	English
	Video Output	On Screen Display	français
	Language	Angle Indicator	Deutsch
	Display		Italiano
	Options		Español

3 Select a language.

The on-screen language will change according to your selection.