Connecting up 02
15
En
• The arrow on the cable connector body
should be face up for correct alignment
with the connector on the player.
Note
• This unit has been designed to be
compliant with HDMI (High Definition
Multimedia Interface) . Depending on the
component you have connected, using a
DVI connection may result in unreliable
signal transfers.
• When you change the component
connected to the HDMI output, you will
also need to change the HDMI settings to
match the new component (see
HDMI Out
on page 35,
HDMI Resolution
on page 36
and
HDMI Color
on page 36 to do this).
However, the settings for each component
are then stored in memory (for up to 2
components).
• The HDMI connection is compatible with
44.1 kHz/48 kHz, 16 bit/20 bit/24 bit 2
channel linear PCM signals, as well as
Doldy Digital, DTS and MPEG audio
bitstream.
HDMI (High Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices.
HDMI was developed to provide the
technologies of High Bandwidth Digital
Content Protection (HDCP) as well as Digital
Visual Interface (DVI) in one specification.
HDCP is used to protect digital content
transmitted and received by DVI-compliant
displays.
HDMI has the capability to support standard,
enhanced, or high-definition video plus
standard to multi-channel surround-sound
audio. HDMI features include uncompressed
digital video, a bandwidth of up to 2.2 gigabytes
per second (with HDTV signals), one connector
(instead of several cables and connectors), and
communication between the AV source and
AV devices such as DTVs.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI licensing LLC.
Resetting the output resolution to the
default setting with HDMI connection
Switch the player to standby then, using the
front panel controls, press
STANDBY/ON
while pressing
to switch the player back to
480P
.
STANDBY/ON
DV-490V
DV393KU.book Page15 Thursday,March 16, 20061:17 PM