43
ADVANCED FUNCTIONS
Changing the password
Change your password whenever you feel it is
necessary. However, if you forget your existing
password, you cannot enter this screen to change it.
1Select “Password Change” in the [Parental
Lock] setting.
The screen changes to the password input screen.
To enter the password, refer to “Entering the
password” on the previous page.
If you have not yet set a password, you cannot
select this setting. Establish a password by
selecting “Level Change” first.
2Use the cursor buttons (2/3/5/∞) or the
number buttons to enter the new password.
3When the new password has been entered,
press ENTER.
The new password is set and the screen returns to
the General menu screen. To go back to the
General menu screen without making any changes,
press RETURN .
Parental Lock
Audio1 GeneralLanguageVideo2
Move
ExitSelect
Level Change
Password Change
SETUP
ENTER
Setup Menu Mode
–
Basic
Parental Lock: Level Change
Audio1 GeneralLanguageVideo2
Move
ExitSelect
1234 6785
Return
Level
SETUP
ENTER
RETURN
Setting the Parental Lock level
Change the Parental Lock level to a higher or lower level
according to the settings printed on the DVD disc jacket
or accompanying documentation. If you use the
Condition Memory function to save the settings for a
particular disc, the Parental Lock level is saved as well.
Because it is saved in memory, Parental Lock levels can
be set for individual discs according to their content
rather than a set level for all DVDs.
1Select “Level Change” in the [Parental Lock]
setting.
The screen changes to the password input screen.
If you have not yet set a password, you will be
asked to do so at this time. To enter the password,
refer to “Entering the password” on this page.
2Use the cursor buttons (2/3) to adjust the
Parental Lock level.
The lock icons appear “unlocked” up to the
selected level to indicate that access is available.
3Press ENTER to set the new level.
The new Parental Lock level is set and the screen
returns to the General menu screen. To go back to
the General menu screen without making any
changes, press RETURN .