Pioneer DV-667A-K, DV-563A Initial Settings menu, Dolby Digital Out, DTS Out, Linear PCM Out

Initial Settings menu 09

Dolby Digital Out

You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.

• Default setting: Dolby Digital

Initial Settings
Digital Audio Out	Digital Out
		Dolby Digital
Video Output	Dolby Digital Out	Dolby Digital > PCM
Language	DTS Out
Display	Linear PCM Out
Options	MPEG Out
Speakers

If your AV receiver (or other connected component) is Dolby Digital compatible, set to Dolby Digital, otherwise set to Dolby Digital > PCM.

•When set to Dolby Digital > PCM, the Audio Output Mode on page 66 must be set to 2 Channel to hear any sound from the digital output.

DTS Out

You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.

• Default setting: DTS

Initial Settings
Digital Audio Out	Digital Out	DTS
Video Output	Dolby Digital Out	DTS > PCM
Language	DTS Out
Display	Linear PCM Out
Options	MPEG Out
Speakers

If your AV receiver (or other connected component) has a built-in DTS decoder, set this to DTS, otherwise set to DTS > PCM (DTS audio is converted to more compatible PCM audio). Check the manual that came with the other component if you’re unsure whether it is DTS compatible.

•If you set to DTS with a non-DTS compat- ible amplifier, noise will be output when you play a DTS disc.

•If you’ve selected DTS > PCM, you can choose how the signal is downmixed to PCM audio. See DTS DownMix on page 66 to change the downmix setting.

•When set to DTS > PCM, the Audio Output Mode on page 66 must be set to 2 Channel to hear any sound from the digital output.

Linear PCM Out

You only need to make this setting if you connected this player to an AV receiver (or other component) using one of the digital outputs.

• Default setting: Down Sample On

Initial Settings
Digital Audio Out	Digital Out	Down Sample On
Video Output	Dolby Digital Out	Down Sample Off
Language	DTS Out
Display	Linear PCM Out
Options	MPEG Out
Speakers

If your AV receiver (or other connected component) is compatible with high sampling rates (96 kHz), set this to Down Sample Off, otherwise set it to Down Sample On (96 kHz audio is converted to a more compatible 48 kHz). Check the manual that came with the other component if you’re unsure whether it is 96 kHz compatible.

55

En