Initial Settings menu | 07 |
Chapter 7
Initial Settings menu
Using the Initial Settings menu
The Initial Settings menu provides audio and video output settings, parental lock settings, and display settings, among others.
If an option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting.
1Press HOME MENU and select ‘Initial Settings’.
Initial Settings
2Use the cursor buttons and ENTER to select the setting and option you want to set.
All the settings and options are explained on the following pages.
Note
•In the table below, the default setting is shown in bold: other settings are shown in italics.
•The Digital Audio Out settings only need to be set if you have connected the digital output of this player to an AV receiver, or other equipment.
•Check the operating instructions supplied with your other equipment to see which digital audio formats it’s compatible with.
•Some settings, such as TV Screen, Audio Language and Subtitle Language may be overridden by the DVD disc. Often these settings can also be made from the DVD disc menu.
Digital Audio Out settings
Setting | Option | What it means |
Digital Out | On | Digital audio is output from the digital outputs. |
|
| Note that there is no digital output when playing SACDs and |
|
| |
|
|
|
| Off | No digital audio output. |
|
|
|
Dolby Digital Out | Dolby Digital | Dolby Digital encoded digital audio is output when playing a |
|
| Dolby Digital DVD disc. |
|
|
|
| Dolby Digital > PCM | Dolby Digital audio is converted to PCM audio before being |
|
| output. |
|
|
|
DTS Out | DTS | DTS encoded digital audio is output when playing a DTS disc. |
|
| (Noise will be output if your amplifier/receiver is not compatible |
|
| with DTS audio.) |
|
|
|
| DTS > PCM | No digital audio is output when playing a DTS disc.DTS audio |
|
| is converted to PCM audio before being output. |
|
|
|
35
En
