Pioneer DV-59AVI, DV-S969AVi operating instructions Auto

08Initial Settings menu

When set to Fix, the level of each of the 5.1 channel analog outputs is fixed. Choose Vari- able if you want to adjust the relative levels to balance the surround sound better for your listening room.

Manual: Use the Joystick to move the cursor up/down to select a speaker.

Initial Settings

Auto

Initial Settings

Digital Audio Out

Video Output

Language

Display

Auto

L	0.0dB
C	0.0dB
R	0.0dB
RS	0.0dB

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

Options

Speakers i.LINK Setup

LS	0.0dB
SW	0.0dB

Move the cursor right (or press ENTER) then use the Joystick (up/down) to set the channel output level.

You can set the individual channel levels between –6dB and +6dB in 0.5 dB incre- ments using the test tone output as a guide to set the correct levels. Adjust the levels until the output level from all channels sounds the same from your usual listening position. Note that Audio Output Mode (page 75) must be set to 5.1 Channel in order to use the test tone.

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

Automatic: Select Auto to start the test tone output. No sound will be heard from the subwoofer.

To turn the test tone on/off for an individual speaker, move the cursor right. The test tone continues playing even when you select a different speaker.

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

Initial Settings

Digital Audio Out Video Output Language Display Options Speakers i.LINK Setup

Auto

L0.0dB

C 0.0dB

R 0.0dB RS 0.0dB

LS 0.0dB SW 0.0dB

As the test tone plays through each speaker in turn, it is highlighted on-screen. Use the Joystick (up/down) to adjust the channel output level of the current speaker. Move the cursor left to exit the test tone sequence, or ENTER to save the settings and exit the channel level setting screen.

To save the settings and exit, press ENTER with the channel level field highlighted (as shown above).

•The subwoofer output will sound quite low compared to the other speakers.

78

En