Additional information
09
98
En
You may see the following messages
displayed in the front panel display when
using the i.LINK interface.
LINK CHECK
The player is checking the i.LINK network. It
does this, for example, when components are
added or removed from the network. The
sound may be interrupted if this happens
during playback.
PQLS ON
Displayed when the player receives a rate
control on request from the receiver during
playback. The sound may be interrupted
momentarily when this happens.
Note that the PQLS feature works only when
the player is connected to a single receiver.
PQLS OFF
Displayed when the player receives a rate
control off request from the receiver during
playback. The sound may be interrupted
momentarily when this happens.
LOOP CONNECT
The i.LINK network cannot function because
it is connected in a loop (see
Creating an
i.LINK network
on page 22).
BUS FULL
The i.LINK bus has reached its capacity and
cannot transmit any more data.
• Static electricity or other external influ-
ences may cause malfunctioning of this
unit. In this case, unplug the power cord
and then plug back in. This will usually
reset the unit for proper operation. If this
does not correct the problem, please
consult your nearest Pioneer service
center.
Playback starts
automatically when the
input function of the AV
receiver is changed to this
player.
• This is an i.LINK feature and not a malfunction.
A connected i.LINK
component doesn’t work
with this player.
• Depending on the connected component, this player may not work
properly with it. See also the operating instructions that came with the
other component.
Problem Remedy
DV-59AVi.book(KU).fm 98 ページ ２００３年８月２０日 水曜日 午後６時４６分