Toshiba B-SA4T Strip Module, SA904-H-QM-R, Guide Roller 1 pc Installation Manual 1 copy

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

EO15-33001A

(Revision Date: Jan. 19, 2006)

2. Strip Module

2. Strip Module

NOTE: Make sure that the firmware version is V1.1 or greater. Firmware V1.0 does not support the strip module.

2.1 B-SA904-H-QM-R

B-SA904-H-QM-R is an optional strip module for the B-SA4TM Series (Metal cover).

•Packing List

The following parts are supplied with the kit. Make sure you have all items shown below.

Strip Unit (1 pc.) Strip Module Cover (1 pc.) SMW-3x6 Screw (4 pc.)

Cutter (1 pc.)

Guide Roller (1 pc.)

Installation Manual (1 copy)

NOTE: When issuing labels in batch mode even though the strip module is fitted, please use the provided cutter to tear off the issued labels. Do not attach the cutter when labels are stripped one by one.

•Installation Procedure

1. Open the Top Cover and the Front Cover. Remove the B-3x6 screw to detach the Connector Cover.

Top Cover

Connector Cover

Front Cover

B-3x6 Screw

2- 1