INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

EO15-33001A

2. Strip Module

5.Secure the Strip Unit to the printer with the two screws. Make sure that the Feed Roller Gear rotates smoothly.

Strip Unit

Feed Roller Gear

SMW-3x6 Screw

 

6. Close the Strip Unit.

Strip Unit

7. Close the Strip Module Cover. Perform an operation check for a proper strip issue.

Media loading procedure-------------

Owner’s Manual, Section 2.3

Operation check------------------------

Owner’s Manual, Section 2.9

System mode setting------------------

System Mode Manual

Cleaning ---------------------------------

Owner’s Manual, Section 4.1.4

2- 10

Page 18
Image 18
Toshiba B-SA4T installation manual Close the Strip Unit