Toshiba B-SA4T Media loading procedure, Operation check, System mode setting, Cleaning

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

EO15-33001A

1. Cutter Module

5.Connect the Cutter Harness to the connector at the front of the printer.

Connector

Cutter Harness

6.Close the Cutter Unit and secure it to the printer with the Set Screw.

Cutter Unit

Set Screw

7. Close the Cutter Module Cover.

• Media loading procedure-------------	Owner’s Manual, Section 2.3
• Operation check------------------------	Owner’s Manual, Section 2.9
• System mode setting------------------	System Mode Manual
• Cleaning ---------------------------------	Owner’s Manual, Section 4.1.3

1- 3