Toshiba B-SA4T installation manual Remove the two screws to detach the Blind Plate

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

EO15-33001A

4. Serial Interface Board: B-SA704-RS-QM-R

2.Remove the Side Panel in the following order. Please note the procedure is different between the B- SA4TM series and the B-SA4TP series.

B-SA4TM	B-SA4TP
(1).Open the Top Cover and Front Cover.	Open the Top Cover. Slide the Side Panel backward,
Top Cover	and then remove it in the direction of arrow A.
	Top Cover
Front Cover
	Side Panel
	A
(2).Remove the two SMW-3x6 screws which secure	Reverse side of Side Panel
the Side Panel.
SMW-3ｘ6 Screw

Side Panel

SMW-3ｘ6 Screw

(3).Close the Front Cover and remove the Side Panel.

Hook

Side Panel

3. Remove the two screws to detach the Blind Plate.

Blind Plate

SMW-3x6

4- 2