Toshiba B-SA4T installation manual Expansion I/O Board B-SA704-IO-QM-R, Packing List

INSTALLATION PROCEDURE FOR OPTIONAL EQUIPMENT

EO15-33001A

(Revision Date: Jan. 19, 2006)

7. Expansion I/O Board: B-SA704-IO-QM-R

7. Expansion I/O Board: B-SA704-IO-QM-R

B-SA704-IO-QM-R is an optional expansion I/O board for the B-SA4TM/SA4TP Series. The pictures used in this section are those of the B-SA4TP, and the installation procedures are common with the B-SA4TM unless otherwise noted.

•Packing List

The following parts are supplied with the kit. Make sure you have all items shown below.

Expansion I/O Board (1 pc.) See Note.

Interface Cable

Blind Plate (1 pc.)

SMW-3x6 Screw (3 pcs.)

Installation Manual (1 copy)

Note: Make sure that the Interface Cable is connected to CN1 on the Expansion PC Board.

1.Remove the two SMW-3x6 screws from the back of the printer.

Side Panel

SMW-3x6 Screw

7- 1